show port-profile-config

Displays the details of configuration applied to interfaces through a port profile.
Syntax
show port-profile-config
Modes

User EXEC mode

Global configuration mode

The show port-profile-config command displays the following information, if configured:

Output field Description
port-speed The configured port speed (100-Gbps, 40-Gbps, 25-Gbps, 10-Gbps, 5-Gbps, 2500, 1000, 100, 10, half or full).
protected-port The ports that are bound to this profile as Protected.
radius Configured radius server.
stp-root-guard The configured STP Root Guard.
stp-bpdu-guard Set the STP BPDU Guard.
rstp-admin-edge-port Set the RSTP admin edge port.
dhcp-snooping-trust Set the Dhcp Snooping.
tagged-vlans List of tagged VLANs for the Port Profile.
untagged-vlan Untagged VLAN for the Port Profile.
egress-acl Set Access-list name for outgoing packets.
ingress-acl Set Access-list name for incoming packets.
dot1x Set dot1x authentication
ipsg Set IP Source Guard
lldp-device Configure lldp device for dynamic Profile
mac-oui Configure MAC OUI for dynamic Profile
macauth Set MAC authentication
poe Set PoE configuration
poe-class

Allocate power based on class of the power devices
poe-priority

Priority class for the purpose of power management
write Write running configuration to flash or terminal
Examples

The following is a sample output from the show port-profile-config command.

device(config)# show port-profile-config

 interface ethernet 1/1/4
 speed-duplex 10-full
 use-radius-server 1.2.3.4
 spanning-tree root-protect
 spanning-tree 802-1w admin-edge-port
 priority 1 power-by-class 2
 stp-bpdu-guard
 dhcp snooping trust
 ip access-group test1 in
 ip access-group test out
 protected port enable
!
 interface ethernet 1/1/5
 speed-duplex 10-full
 use-radius-server 1.2.3.4
 spanning-tree root-protect
 spanning-tree 802-1w admin-edge-port
 priority 1 power-by-class 2
 stp-bpdu-guard
 dhcp snooping trust
 ip access-group test1 in
 ip access-group test out
 protected port enable
History
Release version Command history
FI 10.0.20a This command was introduced.
Parent topic: Show Commands