show pstat dump
Displays the contents of the CPU queue and port status.
Parameters
Modes
User EXEC mode
Examples
The following example shows output for the , , and
show pstat
dump command for stack unit 2.
device# show pstat dump 2
COS-Q Config Details - Rate Limit & Packet Type
COS-Q | pps | Burst | PKT-TYPE |
0 | 1000 | 200 | Prio-0 / Default |
1 | 750 | 500 | Prio-1 |
2 | 1000 | 1000 | Prio-2 / NHOP(IP) |
3 | 3000 | 500 | Prio-3 |
4 | 3000 | 1000 | Prio-4 / L3/MC control |
5 | 3000 | 1000 | Prio-5 / L3 control |
6 | 4000 | 1000 | Prio-6 / L2 control / VRRP |
7 | 4000 | 2000 | Prio-7 / SPX/Stacking control |
8 | 3000 | 1000 | Prio-12 (STK LOW PRI) |
9 | 4000 | 3000 | Prio-13 (STK MED PRI) |
10 | 1000 | 1000 | UDLD |
11 | 50 | 250 | NONE |
12 | 750 | 500 | MCAST MISS/IPMCAST MISS |
13 | 100 | 5000 | SFLOW (SRC & DEST) |
14 | 500 | 200 | Openflow |
15 | 10 | 10 | Bicast |
16 | 1024 | 2048 | FlexAuth |
17 | 10 | 10 | NONE |
18 | 10 | 10 | NONE |
19 | 10 | 10 | L2 MOVE |
20 | 5000 | 3000 | Prio-14 (STK HIGH PRI) |
Hardware COS-Q Counters
COS-Q | PKTS | PKTS-DROP |
0 | 0 | 0 |
1 | 0 | 0 |
2 | 0 | 0 |
3 | 0 | 0 |
4 | 0 | 0 |
5 | 0 | 0 |
6 | 0 | 0 |
7 | 0 | 0 |
8 | 0 | 0 |
9 | 0 | 0 |
10 | 0 | 0 |
11 | 0 | 0 |
12 | 0 | 0 |
13 | 0 | 0 |
14 | 0 | 0 |
15 | 0 | 0 |
16 | 0 | 0 |
17 | 0 | 0 |
18 | 0 | 0 |
19 | 0 | 0 |
20 | 0 | 0 |
Software Q Counters.
COS-Q PKTS | APP-Q PKTS | Tx Rx Rx-Drop In-Q
0 0 | 10 0 | 0 0 0 0
1 0 | 9 0 | 0 0 0 0
2 0 | 8 0 | 0 0 0 0
3 0 | 7 0 | 0 0 0 0
4 0 | 6 0 | 0 0 0 0
5 0 | 5 0 | 0 0 0 0
6 0 | 4 0 | 0 0 0 0
7 0 | 1 0 | 0 0 0 0
8 0 | 3 0 | 0 0 0 0
9 0 | 2 0 | 0 0 0 0
10 0 | 1 0 | 0 0 0 0
11 0 | 20 0 | 0 0 0 0
12 0 | 12 0 | 0 0 0 0
13 0 | 13 0 | 0 0 0 0
14 0 | 14 0 | 0 0 0 0
15 0 | 15 0 | 0 0 0 0
16 0 | 16 0 | 0 0 0 0
17 0 | 17 0 | 0 0 0 0
18 0 | 18 0 | 0 0 0 0
19 0 | 19 0 | 0 0 0 0
20 0 | 0 0 | 0 0 0 0
Pkts Processed: 0, Total Pkts dropped (AppQ-full): 0
Port Counters.
PORT | COUNT-BCM | COUNT-APP | DROP |
The following example shows output for the
show pstat
dump command.
ICX8200-24F Router#show pstat dump 1
Hardware COS-Queue Counters
COS-Queue | PKTS | PKTS-DROP |
0 | 0 | 0 |
1 | 0 | 0 |
2 | 0 | 0 |
3 | 0 | 0 |
4 | 0 | 0 |
5 | 0 | 0 |
6 | 165 | 0 |
7 | 14810 | 0 |
8 | 0 | 0 |
9 | 0 | 0 |
10 | 0 | 0 |
11 | 0 | 0 |
12 | 0 | 0 |
13 | 0 | 0 |
14 | 0 | 0 |
15 | 0 | 0 |
Software Queue Counters.
COS-Queue PKTS | APP-Queue PKTS | Tx Rx Rx-Drop In-Queue
0 0 | 8 0 | 0 0 0 0
1 0 | 7 0 | 0 0 0 0
2 0 | 6 0 | 0 0 0 0
3 0 | 5 0 | 0 0 0 0
4 0 | 4 0 | 0 0 0 0
5 0 | 3 0 | 0 0 0 0
6 165 | 2 164 | 165 164 0 1
7 14810 | 1 14810 | 14810 14810 0 0
8 0 | 9 0 | 0 0 0 0
9 0 | 10 0 | 0 0 0 0
10 0 | 11 0 | 0 0 0 0
11 0 | 12 0 | 0 0 0 0
12 0 | 13 0 | 0 0 0 0
13 0 | 14 0 | 0 0 0 0
14 0 | 15 0 | 0 0 0 0
15 0 | 0 0 | 0 0 0 0
Pkts Processed: 14975, Total Pkts dropped (AppQueue-full): 0, Stack pkts in hash 0
Port Counters
PORT | COUNT-APP |
1/2/1 | 14810 |
1/2/3 | 164 |
History
| Release version | Command history |
|---|---|
| 08.0.90 | This command was introduced. |