show dlogger logs

Displays the logged messages from circular buffer maintained by the distributed logger module.
Syntax
show dlogger logs { all | module module-name } [ dump ]
Parameters
all
Displays all module logged messages beginning with newer logs first.
module module-name
Displays module specific logged messages.
dump
Displays all module logged messages beginning with older logs first.
Modes

Privileged EXEC mode

Usage Guidelines

You can get the list of distributed logger module names from the show dlogger module filter command.

Logs of certain modules that are registered to avail distributed logger facility that do not have filtering capability are also logged into the circular buffer.

Examples

The following example displays all module logged messages. 

device# show dlogger logs all
0:17:36 : 3:arp:arp:[arp intf(mgmt1) phy-port count = 1] [phy-port(mgmt1) arp count = 1]
0:17:36 : 3:arp:arp:mac_l3_map_delete 314. count 0
0:17:36 : 3:arp:arp:
mac_l3_delete_list_node 203 delete node 10.177.144.3 count 0
0:17:36 : 3:arp:arp:
mac_l3_delete_list_node 194 delete node 10.177.144.3 count 1
0:17:36 : 3:arp:arp:
mac_l3_delete_list_node 184 called for 10.177.144.3
0:17:36 : 3:arp:arp:     node d263c0d5 arp_mac d263c0d5
 Node Found0:17:36 : 3:arp:arp:  0 node d263c0d5 arp_mac d263c0d5
0:17:36 : 3:arp:arp:
mac_l3_is_node_in_list 109: searching node 10.177.144.3(0xd263c0d5) count 1 present
0:17:36 : 3:arp:arp:mac_l3_map_delete 305. count 1
0:17:36 : 3:arp:arp:ip_arp_interface_list_delete_dynamic_entry:ARP 10.177.144.3 is deleted from port list for mgmt1 phy mgmt1
0:17:36 : 3:arp:arp:delete_arp, ip=10.177.144.3, t=DYNAMIC, age=10, rtr=0, pend=0, out=emgmt1, v port=mgmt1, NH=4294967295
0:17:36 : 3:arp:arp:Arp age entry: Delete arp 10.177.144.3: Arp Timer: 10, Arp age out: 10
, ip=10.177.144.3, t=DYNAMIC, age=10, rtr=0, pend=0, out=emgmt1, v port=mgmt1, NH=4294967295
0:14:27 : 3:arp:arp:arp_event_handler: L2 EVENT: EVENT_ID_MAC_DELETE: vlan 11 port lg15  mac address 609c.9f52.7bf4
0:14:27 : 3:arp:arp:arp_event_handler: arp_event handler: received event 113
0:7:40 : 3:appl:arp:process_l3_unicast_download_request route_num 0, beg=1, ip_addr 0.0.0.0, virtual_port_num INVALID
0:6:41 : 3:appl:SPX_RING:[portext_ring_process_dwld_request]: Processed download request from unit 2 (number of cb_chain :0)
0:6:41 : 3:appl:SPX_RING:[portext_ring_process_dwld_request]: Received download request from unit 2 (trunk id: 0)
0:6:34 : 3:appl:l3interface:sync pack trunk flushed: trunk id 15 packet index 20 msg index 0 num of entries 1
0:6:34 : 3:appl:l3interface:pack_trunk: Module trunk msg done group id 15 trunk id 15 num of ports 8 num of entries 1 operation sync module trunk add
0:6:29 : 3:appl:sec_macsec:cli:err:[LOGON][CONFIG] - Key is not configured

The following example displays module-specific logged messages. 

device# show dlogger logs module sec_macsec
0:6:29 : 3:appl:sec_macsec:cli:err:[LOGON][CONFIG] - Key is not configured
0:6:29 : 3:appl:sec_macsec:stacking:err:[Master][Port-Cfg] Port 1/2/1, Enable 0
0:6:29 : 3:appl:sec_macsec:stacking:err:[Master][Port-Indication][Req] Port 1/2/1
0:6:29 : 3:appl:sec_macsec:stacking:err:[Master][Port-Cfg] Port 1/2/1, Enable 1
0:6:29 : 3:appl:sec_macsec:stacking:err:[Master][Port-Cfg] Port 1/2/1, Enable 1
0:6:28 : 3:appl:sec_macsec:stacking:err:[Master][Port-Cfg] Port 1/2/1, Enable 0
0:5:11 : 3:appl:sec_macsec:cli:err:[LOGON][CONFIG] - Key is not configured
0:5:11 : 3:appl:sec_macsec:stacking:err:[Master][Port-Cfg] Port 1/2/1, Enable 0
0:5:11 : 3:appl:sec_macsec:stacking:err:[Master][Port-Indication][Req] Port 1/2/1
0:5:11 : 3:appl:sec_macsec:stacking:err:[Master][Port-Cfg] Port 1/2/1, Enable 1
0:5:11 : 3:appl:sec_macsec:stacking:err:[Master][Port-Cfg] Port 1/2/1, Enable 1
History
Release version Command history
09.0.00 This command was introduced.
Parent topic: Show Commands