show ipv6 vrrp-extended

Displays information about IPv6 Virtual Router Redundancy Protocol Extended (VRRP-E) sessions.
Syntax
show ipv6 vrrp-extended [ brief ]
show ipv6 vrrp-extended [ ethernet unit/slot/port | ve num ]
show ipv6 vrrp-extended [ statistics [ ethernet unit/slot/port | ve num ] ]
show ipv6 vrrp-extended [ ve num [ vrid VRID ] ]
show ipv6 vrrp-extended [ vrid VRID [ ethernet unit/slot/port | ve num ] ]
Parameters
brief
Displays summary information about the IPv6 VRRP-E session.
ethernet unit slot port
Displays IPv6 VRRP information only for the specified Ethernet port. A forward slash “/” must be entered between the unit, slot, and port variables.
statistics
Displays statistical information about the IPv6 VRRP-E session.
ve num
Displays IPv6 VRRP-E information only for the specified virtual Ethernet port.
vrid VRID
Displays IPv4 VRRP-E information only for the specified virtual-group ID.
Modes

User EXEC mode

Usage Guidelines

Use this command to display information about IPv6 VRRP-E sessions, either in summary or full-detail format. You can also specify a virtual group or interface for which to display output.

This command supports IPv6 VRRP-E. You can modify or redirect the displayed information by using the default Linux tokens (|, >).

The show ipv6 vrrp-extended command displays the following information:

Output field Description
Total number of VRRP-E routers defined The total number of virtual routers configured on this RUCKUS ICX device.
Note: The total applies only to the protocol the device is running. For example, if the device is running VRRP-E, the total applies only to VRRP-E routers.
Interface The interface on which VRRP-E is configured. If VRRP-E is configured on multiple interfaces, information for each interface is listed separately.
VRID The ID of the virtual router configured on this interface. If multiple virtual routers are configured on the interface, information for each virtual router is listed in a separate row.
Current Priority The current VRRP-E priority of this device for the virtual router.
Flags Whether the backup preempt mode is enabled. If the backup preempt mode is enabled, this field contains a "P". If the mode is disabled, this field is blank.
  • P:Preempt 2:V2 3:V3
  • 2: implies VRRP Version2
  • 3: implies VRRP Version3
Short-Path-Fwd This RUCKUS device’s VRRP state for the virtual router. The state can be one of the following:
  • Init—The virtual router is not enabled (activated). If the state remains Init after you activate the virtual router, make sure that the virtual router is also configured on the other routers and that the routers can communicate with each other.
    Note: If the state is Init and the mode is incomplete, make sure you have specified the IP address for the virtual router.
  • Backup—This device is a backup for the virtual router.
  • Master—This device is the master for the virtual router.
Master IP Address The IPv6 address of the router interface that is currently the Master for the virtual router.
Backup IP Address The IPv6 addresses of the router interfaces that are currently backups for the virtual router.
Virtual IP Address The virtual IPv6 address that is being backed up by the virtual router.
Examples

The following example displays summary information for an IPv6 VRRP-E session. 

device(config)# show ipv6 vrrp-extended brief

Total number of VRRP routers defined: 1
Flags Codes - P:Preempt 2:V2 3:V3 S:Short-Path-Fwd
Intf  VRID  CurrPrio Flags State   Master-IPv6 Backup-IPv6 Virtual-IPv6
                                   Address     Address     Address
----------------------------------------------------------------------
1/1/3  2     100      P3-  Master  Local       3013::2     3013::99

The following example displays detailed IPv6 VRRP-E configuration information about VRID 1. 

device# show ipv6 vrrp-extended vrid 1

Interface 1/1/1
----------------
auth-type md5-authentication
VRID 1 (index 1)
interface 1/1/1
state master
administrative-status enabled
mode non-owner(backup)
virtual mac dddd.eeee.ffff (configured)
priority 100
current priority 100
track-priority 5
hello-interval 1 sec
backup hello-interval 60 sec
advertise backup disabled
dead-interval 0 ms
preempt-mode true
virtual ipv6 address 10:20:1::100
Parent topic: Show Commands