show ip pim group

Displays PIM group information.
Syntax
show ip pim group
Modes

User EXEC mode

The show ip pim group command displays the following information:

Output Field

Description

Total number of groups

Lists the total number of IP multicast groups the device is forwarding.

Note: This list can include groups that are not PIM Sparse groups. If interfaces on the device are configured for regular PIM (dense mode), these groups are listed too.

Index

The index number of the table entry in the display.

Group

The multicast group address

Ports

The device ports connected to the receivers of the groups.

Examples

The following example displays PIM group information. 

device> show ip pim group
Total number of groups for VRF default-vrf: 7
1    Group 226.0.34.0
     Group member at  e1/2/9: v59 
     Group member at  e1/1/16: v57 
2    Group 226.0.77.0
     Group member at  e1/2/9: v59 
     Group member at  e1/1/16: v57 
3    Group 226.0.120.0
     Group member at  e1/2/9: v59 
     Group member at  e1/1/16: v57 
4    Group 226.0.163.0
     Group member at  e1/2/9: v59 
     Group member at  e1/1/16: v57 
5    Group 226.0.206.0
     Group member at  e1/2/9: v59 
     Group member at  e1/1/16: v57 
6    Group 226.0.249.0
     Group member at  e1/2/9: v59 
     Group member at  e1/1/16: v57 
7    Group 226.0.30.0
     Group member at  e1/2/9: v59 
     Group member at  e1/1/16: v57
Parent topic: Show Commands