show ip pim anycast-rp

Displays information for an IPv4 PIM Anycast rendezvous point (RP) interface.
Syntax
show ip pim anycast rp [ anycast-rp-address ]
Modes

User EXEC mode

Usage Guidelines

MSDP and Anycast RP do not interoperate. If transitioning from MSDP to Anycast RP or vice versa, all RPs in the networkmust be configured for the same method of RP peering; either Anycast RP or MSDP.

The show ip pim anycast-rp command displays the following information:

Output Field

Description

Number of Anycast RP:

The Number of Anycast RP specifies the number of Anycast RP sets in the multicast domain.

Anycast RP:

The Anycast RP address specifies a shared RP address used among multiple PIM routers.

ACL ID:

The ACL ID specifies the ACL ID assigned.

ACL Name

The ACL Name specifies the name of the Anycast RP set.

ACL Filter

The ACL Filter specifies the ACL filter state SET or UNSET.

Peer List

The Peer List specifies host addresses that are permitted in the Anycast RP set.

Examples

The following example displays information for a device that has been elected as the BSR. 

device> show ip pim anycast-rp
                Number of Anycast RP: 1 

Anycast RP: 100.1.1.1
  ACL Name: 200
  Peer List: 
    1.1.1.1
    2.2.2.2
    3.3.3.3
Parent topic: Show Commands