show ipv6 ospf virtual-links

Displays information about all OSPFv3 virtual links or specified links.
Syntax
show ipv6 ospf virtual-links [ brief ]
Parameters
brief
Displays summary information.
Modes

User EXEC mode

The show ipv6 ospf virtual-links command displays the following information:

Output field

Description

Index

An index number associated with the virtual link.

Transit Area ID

The ID of the shared area of two ABRs that serves as a connection point between the two routers.

Router ID

Router ID of the router at the other end of the virtual link (virtual neighbor).

Interface Address

The local address used to communicate with the virtual neighbor.

State

The state of the virtual link. Possible states include the following:

  • P2P - The link is functioning as a point-to-point interface.
  • DOWN - The link is down.
Examples

The following is sample output from the show ipv6 ospf virtual-links command when no arguments or keywords are used: 

device> show ipv6 ospf virtual-link

Transit Area ID  Router ID        Interface Address             State
0.0.0.200        192.168.98.111   5100::192:213:111:213         P2P
  Timer intervals(sec) :
    Hello 10, Hello Jitter 10,  Dead 40, Retransmit 5, TransmitDelay 1
  DelayedLSAck:    65 times
  Authentication: Not Configured
  Statistics:
      Type     tx         rx         tx-byte    rx-byte   
      Unknown  0          0          0          0         
      Hello    819        816        32760      32640     
      DbDesc   10         11         300        11008     
      LSReq    6          0          6492       0         
      LSUpdate 1579       1161       138284     101488    
      LSAck    65         52         29340      29532     
      OSPF messages dropped,no authentication: 0
  Neighbor: State: Full Address: 5100::192:113:111:111 Interface: e 4/3/1
History
Parent topic: Show Commands