show ipv6 ospf virtual-neighbor

Displays information about OSPFv3 virtual neighbors.
Syntax
show ipv6 ospf virtual-neighbor [ brief ]
Parameters
brief
Displays summary information.
Modes

User EXEC mode

The show ipv6 ospf virtual-neighbor command displays the following information:

Output field

Description

Index

An index number associated with the virtual neighbor.

Router ID

IPv4 address of the virtual neighbor.

Address

The IPv6 address to be used for communication with the virtual neighbor.

State

The state between the device and the virtual neighbor. The state can be one of the following:

  • Down
  • Attempt
  • Init
  • 2-Way
  • ExStart
  • Exchange
  • Loading
  • Full

Interface

The interface type.

Option

The bits set in the virtual-link hello or database descriptors.

QCount

The number of packets that are in the queue and ready for transmission. If the system is stable, this number should always be 0.

Timer

A timer that counts down until a hello packet should arrive. If "timers" elapses and a hello packet has not arrived, the VL neighbor is declared to be down.

Examples

The following is sample output from the show ipv6 ospf virtual-neighbor command when no arguments or keywords are used: 

device> show ipv6 ospf virtual-neighbor

Index Router ID        Address                       State     Interface
1     10.14.14.14      2001:db8:44:44::4             Full      eth 1/1/8
                Option: 00-00-00    QCount: 0    Timer: 408
2     10.14.14.14      2001:db8:44:44::4             Full      tunnel 256
                Option: 00-00-00    QCount: 0    Timer: 43
History
Parent topic: Show Commands