show ip reverse-path-check interface
Displays unicast Reverse Path Forwarding settings at the interface level on ICX devices.
Modes
Privileged EXEC mode
Usage Guidelines
Use this command to display the interface level unicast Reverse Path Forward settings
such as the uRPF mode and whether uRPF excludes the default route for uRPF source
IP lookup. Use the
show ip interface ethernet command to view details about the interface level RPF mode configuration.
The
show ip reverse-path-check interface command displays the following information.
| Output field | Description |
|---|---|
| Interface | The interface number. |
| uRPF mode | The uRPF mode enabled. |
| uRPF exclude default | Yes specifies that the exclude default option is enabled, while No specifies that the exclude default option is not enabled on the interface. |
Examples
The following example shows the interface level uRPF settings on ICX devices.
device# show ip reverse-path-check interface --------------------------------------------------------------------- Interface uRPF mode uRPF Exclude default --------------------------------------------------------------------- Eth 1/1/11 Strict No
History
| Release version | Command history |
|---|---|
| 08.0.30 | This command was introduced. |