show ip dhcp relay information brief

Displays the configured DHCP relay information options in brief.
Syntax
show ip dhcp relay information brief
Modes

User EXEC mode

Usage Guidelines

This command output shows a maximum of 20 characters. The show ip dhcp relay information command displays all the characters.

Examples

The following example displays the output if option 82 is not enabled. 

device> show ip dhcp relay information brief 
Relay Agent Information: policy: replace

The following example displays the summarized configured DHCP relay information options when the device is configured to keep the existing relay agent information. 

device> show ip dhcp relay information brief
Relay Agent Information: policy: keep

The following example displays the summarized configured DHCP relay information options when the device is configured to discard messages containing relay agent information. 

device> show ip dhcp relay information brief
Relay Agent Information: policy: drop

The following example displays output if the circuit ID or remote ID is configured. 

device(config-if-e10000-1/2/3)# show ip dhcp relay info brief
Relay Agent Information: policy: replace
 Port       Circuit-ID           Remote-ID            Subscriber-ID
 1/2/4      000b0043             001000630054         None

The following example displays output if all the sub-options are configured. 

device(config-if-e10000-1/2/3)# show ip dhcp relay info brief                      
Relay Agent Information: policy: replace
 Port       Circuit-ID           Remote-ID            Subscriber-ID
 1/2/3    	   Brcd01             remote01              Brcd02
History
Release version Command history
08.0.50 This command was introduced.
08.0.95 The output for this command was modified.
Parent topic: Show Commands