show mac-address debug-distributed

Displays the hardware-programmed MAC address entry from all the stack units.
Syntax
show mac-address debug-distributed mac-address vlan vlan-id
Parameters
mac-address
Displays the information for the specified Ethernet MAC address.
vlan vlan-id
Displays the information for the specified VLAN ID.
Modes

All modes.

Usage Guidelines

This command does not support the full hardware MAC address table, all MAC addresses from a specific VLAN, or a single MAC address on multiple VLANs.

This command is not supported on standby units or member units.

The show mac-address debug-distributed mac-address vlan vlan-id command displays the following information:

Output field Description
MAC address The MAC address of the client.
Vlan The VLAN ID.
Examples

The following example displays sample output of the show mac-address debug-distributed command. 

device# show mac-address debug-distributed 609c.9f52.663a vlan 5 

Unit  MAC             Vlan    Modid  Port  L2-flags  L2-flags-decode
 0    609c.9f52.663a     5     0       8   0x010440  Hit
History
Release version Command history
08.0.92 This command was introduced.
Parent topic: Show Commands