`show ip route`

Displays the IP route table information.

Syntax

Parameters

vrf vrf-name: Displays VRF routes.
ip-addr: Displays information for the subnet mask.
num: Displays route starting from index.
bgp: Displays Border Gateway Protocol (BGP) routes.
direct: Displays directly attached routes.
ospf: Displays Open Shortest Path First (OSPF) routes.
rip: Displays Routing Information Protocol (RIP) routes.
static: Displays static IP routes.
summary: Displays a summary of routes.

Modes

User EXEC mode

The show ip route command displays the following information:

Output field	Description
Destination	The destination network of the route.
Cost	The cost of the route.
Type	The route type, which can be one of the following entries: B - The route is learned from BGP. D - The destination is directly connected to this RUCKUS device. R - The route is learned from RIP. S - The route is a static route. Sv - The route is an inter-VRF static route. * - The route is a candidate default route. O - The route is an OSPF route. Unless you use the OSPF option to display the route table, O is used for all OSPF routes. If you do not use the OSPF option, the following type codes are used: O - OSPF intra-area route (within the same area). IA - The route is an OSPF inter-area route (a route that passes from one area into another area). E1 - The route is an OSPF external type 1 route. E2 - The route is an OSPF external type 2 route.

Examples

The following example displays IP route information.

device# show ip route
Total number of IP routes: 4
Type Codes - B:BGP D:Connected O:OSPF R:RIP S:Static; Cost - Dist/Metric
BGP  Codes - i:iBGP e:eBGP
OSPF Codes - i:Inter Area 1:External Type 1 2:External Type 2
STATIC Codes - v:Inter-VRF
        Destination        Gateway         Port          Cost          Type Uptime
1       0.0.0.0/0          200.1.1.2       ve 200        1/1           S    0m3s
2       22.22.22.0/24      DIRECT          ve 200        1/1           S    11d13h
3       22.22.22.22/32     100.1.1.2       ve 100        1/1           Sv   0m3s
4       200.1.1.0/24       DIRECT          ve 200        0/0           D    11d13h

The following example displays summary information about IP routes.

device# show ip route summary
IP Routing Table - 4 entries:
  1 connected, 3 static, 0 RIP, 0 OSPF, 0 BGP
  Number of prefixes:
  /0: 1 /24: 2 /32: 1
Nexthop Table Entry - 3 entries

History

Release version	Command history
08.0.95	This command was modified to display the details of static inter-VRF routing.

Show Commands

show ip route

`show ip route`