show ipv6 dhcp-relay interface

Displays the IPv6 DHCP relay information for a specific interface.
Syntax
show ipv6 dhcp-relay interface stack/slot/port
Modes

Privileged EXEC mode

The show ipv6 dhcp-relay interface command displays the following information:

Output field Description
DHCPv6 Relay Information for interface interface-type port-num The DHCPv6 relay information for the specific interface.
Destination The configured destination IPv6 address.
OutgoingInterface The interface on which the packet will be relayed if the destination relay address is a link local or multicast address.
Options The current information about the DHCPv6 relay options for the interface.
Interface-Id The interface ID option indicating whether the option is used.
Option-79 Displays if option-79 is used or not.
Examples

The following example displays the DHCPv6 relay information for an interface. 

device# show ipv6 dhcp-relay interface ethernet 1/1/1

DHCPv6 Relay Information for interface e 1/1/1: 
Destinations:
 Destination                    OutgoingInterface 
 2001::2                        NA
Options:
 Interface-Id: No     Remote-Id:No		Option-79:Yes
Prefix Delegation Information:
 Current:0 Maximum:100 AdminDistance:10
History
Release version Command history
08.0.10d This command was introduced.
08.0.30 Support for this command was added in FastIron 08.0.30 and later releases.
08.0.40 Support for link-layer-option (option 79) was introduced.
Parent topic: Show Commands