show ip igmp interface
Displays the status of a Internet Group
Management Protocol (IGMP) multicast enabled port.
Syntax
show ip igmp[vrfvrf-name]interface[ethernetunit/slot/port|laglag-id|veve-num][group[A.B.C.D ]] [detail|trackingshow ip igmptunneltunnel-idParameters
Modes
Privileged EXEC mode
Usage Guidelines
The GRE tunnel interface is enabled under the router PIM configuration.
The
show ip igmp interface command displays the following information:
Examples
The following example displays information for a multicast-enabled port.
device# show ip igmp interface
---------+------+---------+---------------+---------+-----+-----+---------
Intf/Port|Groups| Version |Querier | Timer |V1Rtr|V2Rtr|Tracking
| |Oper Cfg| |OQrr GenQ| | |
---------+------+----+----+---------------+----+----+-----+-----+---------
e1/1/3 1 3 3 Self 0 94 No No Disabled
e1/1/4 0 2 - Self 0 94 No No Disabled
v30 1 3 3 Disabled
e1/1/2 3 - - Self 0 20 No No
v40 0 3 3 Disabled
e1/1/2 3 - - Self 0 20 No No
v50 0 2 - Disabled
e1/1/12 2 - - Self 0 29 No No
e1/1/8 2 - - 50.1.1.10 46 0 No Yes
e1/1/1 2 - - Self 0 115 No Yes
The following example displays information for the interface VE 4041 group.
device# show ip igmp interface ve 4041 group Total 100 groups -------------------------------------------------------------------- Idx Group Address Port Intf GrpCmpV Mode Timer Srcs ----+----------------+---------+---------+-------+-------+-----+----- 1 239.0.1.1 e1/2/8 v4041 Ver2 exclude 247 0 Total number of groups 1
The following example displays information for IGMP configurations for an interface, including MVR configurations.
device> show ip igmp interface
---------+------+---------+---------------+---------+-----+-----+---------+------
Intf/Port|Groups| Version |Querier | Timer |V1Rtr|V2Rtr|Tracking |MVR
| |Oper Cfg| |OQrr GenQ| | | |Type
---------+------+----+----+---------------+----+----+-----+-----+---------+------
v1 0 2 - Disabled Source
e1/4/1 0 2 - * 0 0 No No
e1/3/1 0 2 - * 249 0 No Yes
v10 1 2 - Disabled Receiver
e1/1/48 1 2 - * 0 81 No No
History
| Release version | Command history |
|---|---|
| 08.0.50 | This command was modified to include the IGMP group keyword. |
| 09.0.10 | The output of this command was updated to include MVR information. |