show bfd v6-neighbors

Displays IPv6 information for Bidirectional Forwarding Detection (BFD) information sessions.
Syntax
show bfd v6-neighbors[ipv6-address|bgp[[details]ip-address|ipv6-address] |details[ip-address|ipv6-address] |ospf6[details][ip-address|ipv6-address] ]
Parameters
ipv6-address
Specifies an IPv6 address.
bgp
Specifies BGP information.
details
Specifies detailed information.
ip-address
Specifies an IP address.
ospf6
Specifies OSPFv3 information.
Modes

User EXEC mode

Usage Guidelines

This command is supported for ICX 7850 devices only.

Examples

The following example shows sample output from the show bfd v6-neighbors command. 

device> show bfd v6-neighbors

Flags: H:Hop [S:Single/M:Multi] P:Passive-Mode M:Micro-BFD R:RxRemote [Y:Yes/N:No]
MinTx/MinRx/NegTx/NegRx/DTime [milliseconds]  HoldTime [seconds]
Total Neighbors in VRF [default]: 1 A-DOWN:0 DOWN:0 INIT:0 UP:1

Id  Neighbor                                Local                                   State  NHopIntf  NegRx|NegTx|DTime   P/H/M/R
--  --------                                -----                                   -----  --------  -----------------   -------
2   fe80::629c:9fff:fe20:8380               fe80::768e:f8ff:fef9:6d80               UP     v2        NA    NA    NA      N/S/Y/Y
History
Release version Command history
08.0.90 This command was introduced.
Parent topic: Show Commands