show bfd uc sessions

Displays Bidirectional Forwarding Detection (BFD) session information for the micro controller.
Syntax
show bfd uc sessions { ipv4 | ipv6 } { all | session-id } [ stack-id ]
show bfd uc sessions statistics drops stack-id
Parameters
ipv4
Specifies IPv4 sessions.
ipv6
Specifies IPv6 sessions.
all
Specifies all sessions.
session-id
Specifies a session.
stack-id
Specifies a stack.
statistics
Specifies BFD session statistics.
drops
Specifies statistics for session drops.
Modes

User EXEC mode

Usage Guidelines

This command is supported for ICX 7850 devices only.

Examples

The following example shows all IPv4 BFD session information for the micro controller. 

device> show bfd uc sessions ipv4 all

Flags:  H: Hop  [S:Single/M:Multi]  SH/MH: Single-hop/Multi-hop
        E: Echo [Y:Yes/N:No]            D: dem-mode [Y:Yes/N:No]
        P: Passive-Mode [Y:Yes/N:No]   V6: Session is V6
        Ad-Tx-Rem:  Tx adm-down to remote on session removal
        M-Bfd    :  Micro Bfd SH sessions [Will be Yes for LAG ports]
Intervals: All time intervals shown in msecs,  Multiplier shown in units

Id  Neighbor          Local             Phy-Port   L-State  R-State  M-Bfd  P/H/E
--  --------          -----             --------   -------  -------  -----  -----
1   20.20.20.1        10.10.10.1        1/1/13     UP       UP       No     N/M/N
2   40.40.40.1        30.30.30.1        1/1/14     UP       UP       No     N/M/N
History
Release version Command history
08.0.90 This command was introduced.
Parent topic: Show Commands