show manager log

Displays information about the connection between an ICX device and the ICX-Manager.
Syntax
show manager log
Modes

Privileged EXEC mode

Usage Guidelines

The show manager log command records queries and responses is used to troubleshoot connection issues.

Examples

Enter the following command to display the ICX-Manager log. 

device# show manager log

The following example displays information about a connection to RUCKUS One.

ICX# show manager log 

2025-05-08 08:54:52: MGMT Agent: Streaming initiated
2025-05-08 08:54:50: MGMT Agent: Streaming is disabled and config deleted
2025-05-08 08:54:46: MGMT Agent: Disabling WebUi
2025-05-08 08:54:46: MGMT Agent: Disabling restconf
2025-05-08 08:54:46: MGMT Agent: NATS Tunnel established to device.ruckus.cloud
2025-05-08 08:54:46: MGMT Agent: Manager state changed from NATS CONNECTING to NATS CONNECTED
2025-05-08 08:54:42: MGMT Agent: Starting NATS tunnel
2025-05-08 08:54:42: MGMT Agent: Stopping NATS tunnel
2025-05-08 08:54:42: MGMT Agent: Event RUCKUS_ONE_NATS_CONNECT_EVENT received on state NATS CONNECTING from dmanager_execute_fsm:1018
2025-05-08 08:54:39: MGMT Agent: Manager state changed from QUERY to NATS CONNECTING
2025-05-08 08:54:39: MGMT Agent: DLC state request to RUCKUSONE Controller device.ruckus.cloud:443 return with code 200
2025-05-08 08:54:37: MGMT Agent: Sending DLC state request to RUCKUSONE Controller device.ruckus.cloud:443
2025-05-08 08:54:37: MGMT Agent: Event RUCKUS_ONE_QUERY_EVENT received on state QUERY from dmanager_execute_fsm:1013
2025-05-08 08:54:35: MGMT Agent: manager mode set to RUCKUSONE on device.ruckus.cloud:443
2025-05-08 08:54:35: MGMT Agent: Manager state changed from INIT to QUERY
2025-05-08 08:54:35: MGMT Agent: dlc/discovery to RuckusOne Controller device.ruckus.cloud:443 return with code 200
2025-05-08 08:54:32: MGMT Agent: Sending dlc/discovery to RuckusOne Controller device.qa.ruckus.cloud:443
2025-05-08 08:54:32: MGMT Agent: IPv4 DNS resolves successfully for hostname: device.ruckus.cloud with ip address 34.170.110.156
2025-05-08 08:54:32: MGMT Agent: Event RUCKUS_ONE_INIT_EVENT received on state INIT from dmanager_execute_fsm:1003
2025-05-08 08:54:29: MGMT Agent: swr discovery to  sw-registrar.ruckuswireless.com (34.170.110.156):443 return with code 200
2025-05-08 08:54:27: MGMT Agent: Sending swr discovery to sw-registrar.ruckuswireless.com (34.170.110.156):443

The following example displays information about a connection to SmartZone.

ICX# show manager log

2025-05-08 07:39:10: MGMT Agent: Disabling WebUi
2025-05-08 07:39:10: MGMT Agent: Disabling restconf
SYSLOG: <14> May 08 08:45:45 ICX CLI CMD: "show manager logs" by super user from console      2025-05-08 07:39:10: MGMT Agent: Manager state changed from SSH CONNECTING to SSH CONNECTED
2025-05-08 07:39:10: MGMT Agent: SSH Tunnel established to 10.177.19.14 with username icxtunnel
2025-05-08 07:39:10: MGMT Agent: Starting revssh tunnel
2025-05-08 07:39:07: MGMT Agent: Event SZ_SSH_CONNECT_EVENT received on state SSH CONNECTING from dmanager_execute_fsm:1018
2025-05-08 07:39:03: MGMT Agent: Manager state changed from QUERY to SSH CONNECTING
2025-05-08 07:39:03: MGMT Agent: HTTP request to SMARTZONE Controller 10.177.19.14:443 return with code 200
2025-05-08 07:39:02: MGMT Agent: Sending HTTP request to SMARTZONE Controller 10.177.19.14:443
2025-05-08 07:39:02: MGMT Agent: Event SZ_QUERY_EVENT received on state QUERY from dmanager_execute_fsm:1013
2025-05-08 07:38:57: MGMT Agent: manager mode set to SMARTZONE on 10.177.19.14:443
2025-05-08 07:38:57: MGMT Agent: Manager state changed from INIT to QUERY
2025-05-08 07:38:57: MGMT Agent: Event RUCKUS_ONE_INIT_EVENT received on state INIT from dmanager_execute_fsm:1003
2025-05-08 07:38:56: MGMT Agent: Manager state changed from NONE to INIT
2025-05-08 07:38:55: MGMT Agent: Stopping NATS tunnel
2025-05-08 07:38:52: MGMT Agent: Event RUCKUS_ONE_CONF_EVENT received on state NONE from dmanager_execute_fsm:998
History
Release version Command history
08.0.80 This command was introduced as show sz log.
08.0.92 The command name was changed to show manager log.
10.0.10g_cd1 The command output was modified to include detailed manager state transitions, SSH tunnel status, and controller connection events. The output of this command was also modified to include a SYSLOG entry indicating execution by a super user from the console.
Parent topic: Show Commands