show ip rip route

Displays RIP route information for a device or a specific interface.
Syntax
show ip rip route[ip-address|ip-address / L]
Parameters
ip-address
Specifies the IP address, in the format A.B.C.D, for which RIP routes are displayed.
ip-address / L
Specifies the IP address prefix and mask, in the format A.B.C.D/L, where "L" is the mask length. Information is displayed for IP addresses matching the mask.
Modes

Privileged EXEC mode

The show ip rip route command displays the following information:

Output field Description
RIP Routing Table - nn entries Indicates the number of routes in the device's routing table.
RIP route designation Designates each route by CIDR designation, originating IP address, and interface.
RIP route settings For each designated route, indicates protocol, metric setting, tag, and non-default timer settings.
Examples

The following example shows RIP route information for the device. 

device# show ip rip route
RIP Routing Table - 474 entries:
1.1.1.1/32, from 169.254.30.1, e 1/1/23 (820)
RIP, metric 4, tag 0, timers: aging 13
1.1.2.1/32, from 169.254.50.1, e 1/3/1 (482)
RIP, metric 3, tag 0, timers: aging 42
1.1.6.1/32, from 169.254.100.1, ve 101 (413)
RIP, metric 2, tag 0, timers: aging 42
169.254.40.0/24, from 192.168.1.2, e 1/1/1 (1894)
RIP, metric 3, tag 0, timers: aging 14
169.254.50.0/24, from 192.168.1.2, e 1/1/1 (1895)
RIP, metric 4, tag 0, timers: aging 14
169.254.100.0/24, from 192.168.1.2, e 1/1/1 (2040)
RIP, metric 2, tag 0, timers: aging 14
169.254.101.0/30, from 192.168.1.2, e 1/1/1 (2105)
223.229.32.0/31, from 169.254.50.1, e 1/3/1 (818)
RIP, metric 2, tag 0, timers: aging 21
Parent topic: Show Commands