show ip pim vrf

Displays Protocol Independent Multicast (PIM) information for a virtual routing and forwarding (VRF) instance.
Syntax
show ip pim vrf vrf-name [ anycast-rp | bsr | counter nsr | counter tbp | dense | error | flow-count | group | hw-resource | nsr | optimization [ dit-idx value | vlan-fid value ] | prune | resource | rp-candidate | rpf ip-address [ group-address ] | rp-hash group-address | rp-map | rp-set | sparse | traffic [ join-prune ] [ rx | tx ] ]
show ip pim vrf vrf-name interface [ ethernet unit/slot/port | lag number | loopback loopback-number | tunnel number | ve ve-number ]
show ip pim vrf vrf-name mcache [ source-address [ group-address ] | group-address | counts | dense | dit-idx dit-idx | g_entries | receiver { ethernet unit/slot/port | lag number | vlan vlan-id } | sg_entries | sparse | ssm ]
show ip pim vrf vrf-name mcache counts [ source-address [ group-address ] | group-address | dense | dit-idx dit-idx | g_entries | receiver { ethernet unit/slot/port | lag number | vlan vlan-id } | sg_entries | sparse | ssm ]
show ip pim vrf vrf-name neighbor [ ethernet unit/slot/port | lag number | tunnel number | ve ve-number ]
Parameters
vrf-name
Specifies a VRF instance.
anycast-rp
Specifies information for an IPv4 PIM Anycast rendezvous point (RP) interface.
bsr
Specifies bootstrap router (BSR) information.
counter nsr
Specifies multicast nonstop routing (NSR) counter and statistics information.
counter tbp
Specifiesmulticast Traverse by Parts (TBP) statistics .
dense
Specifies PIM Dense configuration information.
error
Specifies PIM errors.
flow-count
Specifies flowcache counters.
group
SpecifiesPIM group information.
hw-resource
Specifies usage and fail-count information for SG entries.
nsr
Specifies the multicast nonstop routing (NSR) status information.
optimization
Specifies PIM optimization information.
dit-idx value
Represents the IPMC index.
vlan-fid value
Represents the software VLAN index that stores the Layer 2 OIF sets.
prune
Specifies all multicast cache entries that are currently in a pruned state and have not yet aged out.
resource
Specifies the hardware resource information, such as hardware allocation, availability, and limit, for software data structures.
rp-candidate
Specifies candidate rendezvous point (RP) information.
rpf
Specifies what PIM sees as the best reverse path to the source. While there may be multiple routes back to the source, the one displayed by this command is the one that PIM thinks is best.
rp-hash group-address
Specifies rendezvous-point (RP) information for a PIM Sparse group.
rp-map
Specifies rendezvous-point (RP)-to-group mapping information.
rp-set
Specifies rendezvous-point (RP)-set list for the device elected as the bootstrap router (BSR).
sparse
Specifies PIM Sparse configuration information, including whether the hardware-drop feature is enabled or disabled, and information for PIM SSM range ACL configuration.
traffic
Specifies IPv4 PIM traffic statistics.
join-prune
Specifies displaying join and prune statistics.
rx
Specifies received PIM traffic statistics.
tx
Specifies transmitted PIM traffic statistics.
interface
Specifies an interface.
lag number
Specifies a LAG interface.
loopback loopback-number
Specifies a loopback interface.
tunnel number
Specifies a GRE tunnel.
ve ve-number
Specifies a virtual interface.
mcache
Specifies the PIM multicast cache.
source-address
Specifies the multicast cache source address.
group-address
Specifies the multicast cache group address.
counts
Specifies the number of entries.
dense
Specifies displaying only the PIM Dense Mode entries.
dit-idx dit-idx
Specifies displaying all entries that match a specified downstream interface (DIT).
g_entries
Specifies displaying only the (*, G) entries.
receiver
Specifies displaying all entries that egress a specified interface.
sg_entries
Specifies displaying only the (S, G) entries.
sparse
Specifies displaying only the PIM Sparse Mode entries.
ssm
Specifies displaying only the SSM entries.
neighbor
Specifies an IP PIM neighbor.
Modes

User EXEC mode

Examples

The following example displays PIM Sparse configuration for a VRF instance named my_vrf. 

device> show ip pim my_vrf sparse

Global PIM Sparse Mode Settings
  Maximum Mcache         : 12992       Current Count              : 0
  Hello interval         : 30          Neighbor timeout           : 105
  Join/Prune interval    : 60          Inactivity interval        : 180
  Hardware Drop Enabled  : Yes         Prune Wait Interval        : 3
  Bootstrap Msg interval : 60          Candidate-RP Msg interval  : 60
  Register Suppress Time : 60          Register Probe Time        : 10
  Register Stop Delay    : 10          Register Suppress interval : 60
  SSM Enabled            : Yes         SPT Threshold              : 1
  SSM Group Range        : 232.0.0.0/8
  Route Precedence       : mc-non-default mc-default uc-non-default uc-default
History
Parent topic: Show Commands