show access-list all

Displays access control list (ACL) status information for all named and numbered ACLs.
Syntax
show access-list { all }
Parameters
all
Displays information about all ACLs.
Modes

User EXEC mode

Usage Guidelines

From FastIron release 08.0.50, sequence numbers are automatically added to existing ACL rules in the following manner:

  • The first rule within each ACL is numbered 10.
  • The sequence number for each succeeding rule is incremented by 10.

Examples

The following example shows sample output from the show access-list all command. 

device# show access-lists all
Extended IP access list 100 (Total flows: N/A, Total packets: N/A, Total rule cam use: 3)
10: permit udp host 192.168.2.169 any (Flows: N/A, Packets: N/A, Rule cam use: 1)
20: permit icmp any any (Flows: N/A, Packets: N/A, Rule cam use: 1)
30: deny ip any any (Flows: N/A, Packets: N/A, Rule cam use: 1)
History
Release version Command history
08.0.40 The command was modified. ACL names are no longer supported as an optional argument.
08.0.50 The command was modified so that sequence numbers are automatically added to existing rules.
08.0.95 The command was modified to remove hw-usage and named-acl options.
Parent topic: Show Commands