show ipv6 ospf

The following example displays sample output from the show ipv6 ospf command.

device> show ipv6 ospf

OSPFv3 Process number 0 with Router ID 0xc0a862d5(10.168.98.213)
Running 0 days 2 hours 55 minutes 36 seconds
Number of AS scoped LSAs is 4
Sum of AS scoped LSAs Checksum is 18565
External LSA Limit is 250000
Database Overflow Interval is 10
Database Overflow State is NOT OVERFLOWED
Route calculation executed 15 times
Pending outgoing LSA count 0
Authentication key rollover interval 300 seconds
Number of areas in this router is 3
Router is operating as ABR
Router is operating as ASBR, Redistribute: CONNECTED RIP
High Priority Message Queue Full count: 0
Graceful restart helper is enabled, strict lsa checking is disabled
Nonstop-routing is ENABLED

The following example displays sample output from the show ipv6 ospf command including information about the maximum number of LSAs in the LSDB and the device configurations for checking the overflow state.

device> show ipv6 ospf

OSPFv3 Process number                    0
 Router ID                                2.2.2.2 (0x2020202)
 Running                                  0 days 1 hours 39 minutes 8 seconds
 Sum of AS scoped LSAs Checksum           0
 LSDB Limit                               40
 LSDB Overload Interval                   60 seconds
 LSDB Overload Frequency                  36
 LSDB Overload Check timer running        YES
 LSDB Overload timer running              NO
 LSDB Overload State                      NO OVERFLOW
 External LSA Limit                       40
 External Database Overflow Interval      600 seconds
 External LSDB Overflow timer running     NO
 External Database Overflow State         NO OVERFLOW
 Route calculation executed times         3
 Pending outgoing LSA count               0
 Authentication key rollover interval     300 seconds
 Number of areas in this router           2
 High Priority Message Queue Full count   0                      
 Medium Priority Message Queue Full count 0
 BFD is disabled                         
 Graceful restart helper                  enabled
 Strict lsa checking                      disabled
 Nonstop Routing                          enabled
 Total Keychain events received           0