show ipv6 bgp peer-group

Displays peer-group information.
Syntax
show ipv6 bgp [ vrf vrf-name ] peer-group [ peer-group-name ]
Parameters
vrf vrf-name
Displays output for the designated VRF.
peer-group-name
Displays output for the designated peer group.
Modes

User EXEC mode

Usage Guidelines

Only the parameters that have values different from their defaults are listed.

Examples

The following example shows sample output from the show ipv6 bgp peer-group command. 

device# show ipv6 bgp peer-group   
1   BGP peer-group is p1, Remote AS: 1
      Address family : IPV4 Unicast 
        activate 
      Address family : IPV6 Unicast 
        activate 
    Members:
       IP Address: 17.1.1.1
       IP Address: 2021:17::1:1:1

The following example shows information for the BGP peer group named p1.

device# show ipv6 bgp peer-group p1
2   BGP peer-group is p1, Remote AS: 1
      Address family : IPV4 Unicast 
        activate 
      Address family : IPV4 Multicast
        no activate 
      Address family : IPV6 Unicast 
        activate 
      Address family : IPV6 Multicast 
        no activate 
      Address family : VPNV4 Unicast 
        no activate 
        no activate 
      Address family : L2VPN VPLS 
        no activate 
    Members:
       IP Address: 17.1.1.1
       IP Address: 2021:17::1:1:1

The following example displays BGP peer group information for a specific VRF (blue).

device# show ipv6 bgp vrf blue peer-group   
1   BGP peer-group is p1, Remote AS: 1
      Address family : IPV4 Unicast 
        activate 
      Address family : IPV6 Unicast 
        activate 
    Currently there are no members.

The following example displays information about BGP peers for a specific VRF (blue) and peer-group (p1).

device# show ipv6 bgp vrf blue peer-group p1
2   BGP peer-group is p1, Remote AS: 1
      Address family : IPV4 Unicast 
        activate 
      Address family : IPV4 Multicast
        no activate 
      Address family : IPV6 Unicast 
        activate 
      Address family : IPV6 Multicast 
        no activate 
      Address family : VPNV4 Unicast 
        no activate 
        no activate 
      Address family : L2VPN VPLS 
        no activate
History
Release version Command history
09.0.10 This command was modified to add the ability to specify a VRF.
Parent topic: Show Commands