show dot1x-mka statistics
Displays current MACsec Key Agreement (MKA) statistics on the interface.
Parameters
Modes
User EXEC configuration mode
Usage Guidelines
It is recommended that you use the
clear dot1x-mka statistics
command to clear results of the previous
show dot1x-mka statistics command before re-executing it.
The
show dot1x-mka statistics command displays the following information:
| Output field | Description |
|---|---|
| Interface (device/slot/port) | The output fields describe MACsec activity for the designated interface. |
| MKA in Pkts | MKA protocol packets received |
| MKA in SAK Pkts | MKA protocol packets received containing a SAK |
| MKA in Bad Pkts | MKA protocol packets received that are bad |
| MKA in Bad ICV Pkts | MKA protocol packets received with a bad ICV |
| MKA in Mismatch Pkts | MKA protocol packets received with mismatched CAK |
| MKA out Pkts | MKA protocol packets transmitted |
| MKA out SAK Pkts | MKA protocol packets transmitted containing a SAK |
| Number of SAK | Total number of SAKs received |
Examples
The following example shows MKA statistics for Ethernet interface 1/3/3 (device 1, slot 3, port 3), which is transmitting and receiving MACsec frames.
device(config-dot1x-mka-1/3/3)# clear dot1x-mka statistics ethernet 1/3/3 device(config-dot1x-mka-1/3/3)# show dot1x-mka statistics ethernet 1/3/3 Interface : 1/3/3 MKA in Pkts : 8585 MKA in SAK Pkts : 1 MKA in Bad Pkts : 0 MKA in Bad ICV Pkts : 0 MKA in Mismatch Pkts : 0 MKA out Pkts : 8687 MKA out SAK Pkts : 0 Number of SAK : 1
History
| Release version | Command history |
|---|---|
| 08.0.20 | This command was introduced. |
| 08.0.30 | Support for this command was added on ICX 7450 devices. |
| 08.0.70 | Support for this command was added on ICX 7650 devices. |
| 08.0.90 | Support for this command was added on ICX 7850 devices. |