show ip bgp vrf neighbors
Displays configuration information and statistics for BGP4 neighbors of the device
for a virtual routing and forwarding (VRF) instance.
Syntax
show ip bgp vrf
vrf-name
neighbors
[
ip-addr
]show ip bgp vrf
vrf-name
neighbors
last-packet-with-errorshow ip bgp vrf
vrf-name
neighbors
routes-summaryshow ip bgp vrf
vrf-name
neighbors
ip-addr
advertised-routes
[
detail
]
[
ip-address
/mask
]show ip bgp vrf
vrf-name
neighbors
ip-addr
flap-statisticsshow ip bgp vrf
vrf-name
neighbors
ip-addr
last-packet-with-error
[
decode
]show ip bgp vrf
vrf-name
neighbors
ip-addr
received
[
prefix-filter
]show ip bgp vrf
vrf-name
neighbors
ip-addr
received-routes
[
detail
]show ip bgp vrf
vrf-name
neighbors
ip-addr
rib-out-routes
[
detail
]
[
ipv6-address
/mask
]show ip bgp vrf
vrf-name
neighbors
ip-addr
routesshow ip bgp vrf
vrf-name
neighbors
ip-addr
routes
{
best
|
not-installed-best
|
unreachable
}show ip bgp vrf
vrf-name
neighbors
ip-addr
routes
detail
{
best
|
not-installed-best
|
unreachable
}show ip bgp vrf
vrf-name
neighbors
ip-addr
routes-summaryParameters
- routes-summary
- Displays routes received, routes accepted, number of routes advertised by peer, and so on.
- advertised-routes
- Specifies the routes that the device has advertised to the neighbor during the current BGP4 session.
- flap-statistics
- Specifies the route flap statistics for routes received from or sent to a BGP4 neighbor.
- received-routes
- Specifies all route information received in route updates from BGP4 neighbors of the device since the soft-reconfiguration feature was enabled.
- rib-out-routes
- Displays information about the current BGP4 Routing Information Base (Adj-RIB-Out) for specific neighbors and specific destination networks.
- not-installed-best
- Displays routes received from the neighbor that are the best BGP4 routes to their destination but were not installed in the route table because the device received better routes from other sources.
- unreachable
- Displays routes that are unreachable because the device does not have a valid RIP, OSPF, or static route to the next hop.
Modes
User EXEC mode
Privileged EXEC mode
Examples
The following example shows how to display configuration information and statistics for BGP4 neighbors of the device for a VRF instance.
device# show ip bgp vrf blue neighbors
Total number of BGP Neighbors:1
1 IP Address: 15.1.1.1, AS: 1 (IBGP), RouterID: 3.3.3.3, VRF: blue
State: ESTABLISHED, Time: 1d22h43m13s, KeepAliveTime: 10, HoldTime: 30
KeepAliveTimer Expire in 2 seconds, HoldTimer Expire in 29 seconds
Minimal Route Advertisement Interval: 0 seconds
RefreshCapability: Received
GracefulRestartCapability: Received
Restart Time 120 sec, Restart bit 0
afi/safi 1/1, Forwarding bit 0
GracefulRestartCapability: Sent
Restart Time 120 sec, Restart bit 0
afi/safi 1/1, Forwarding bit 0
Messages: Open Update KeepAlive Notification Refresh-Req
Sent : 1 1 16729 0 0
Received: 1 1 18103 0 0
Last Update Time: NLRI Withdraw NLRI Withdraw
Tx: --- --- Rx: --- ---
Last Connection Reset Reason:Unknown
Notification Sent: Unspecified
Notification Received: Unspecified
Neighbor NLRI Negotiation:
Peer Negotiated IPV4 unicast capability
Peer configured for IPV4 unicast Routes
Neighbor AS4 Capability Negotiation:
Outbound Policy Group:
ID: 4, Use Count: 2
AO Keychain name : 1
TCP Connection state: ESTABLISHED
TCP Keychain name : 1
TCP-AO Enabled : YES
TCP-AO in use : YES
Keychain valid : YES
No of segments dropped : 0
Send-Active-Key
---------------
Key-id : 1
Crypto Algorithm : AES-128-CMAC
Send-id : 100
Recv-id : 100
Include-tcp-options : YES
Accept-ao-mismatch : YES
Recv-Active-Key
---------------
Key-id : 1
Crypto Algorithm : AES-128-CMAC
Send-id : 100
Recv-id : 100
Include-tcp-options : YES
Accept-ao-mismatch : YES
Maximum segment size: 1420
TTL check: value: 0
Byte Sent: 317929, Received: 344035
Local host: 15.1.1.2, Local Port: 179
Remote host: 15.1.1.1, Remote Port: 8220
ISentSeq: 21517275 SendNext: 21835205 TotUnAck: 0
TotSent: 317930 ReTrans: 0 UnAckSeq: 21835205
IRcvSeq: 155554412 RcvNext: 155898448 SendWnd: 16384
TotalRcv: 344036 DupliRcv: 0 RcvWnd: 16384
SendQue: 0 RcvQue: 0 CngstWnd: 1420
The following example displays BGP neighbor information for a specific VRF (blue) and IP address (15.1.1.1).
device# show ip bgp vrf blue neighbors 15.1.1.1
1 IP Address: 15.1.1.1, AS: 1 (IBGP), RouterID: 3.3.3.3, VRF: blue
State: ESTABLISHED, Time: 1d22h43m42s, KeepAliveTime: 10, HoldTime: 30
KeepAliveTimer Expire in 3 seconds, HoldTimer Expire in 28 seconds
Minimal Route Advertisement Interval: 0 seconds
RefreshCapability: Received
GracefulRestartCapability: Received
Restart Time 120 sec, Restart bit 0
afi/safi 1/1, Forwarding bit 0
GracefulRestartCapability: Sent
Restart Time 120 sec, Restart bit 0
afi/safi 1/1, Forwarding bit 0
Messages: Open Update KeepAlive Notification Refresh-Req
Sent : 1 1 16732 0 0
Received: 1 1 18106 0 0
Last Update Time: NLRI Withdraw NLRI Withdraw
Tx: --- --- Rx: --- ---
Last Connection Reset Reason:Unknown
Notification Sent: Unspecified
Notification Received: Unspecified
Neighbor NLRI Negotiation:
Peer Negotiated IPV4 unicast capability
Peer configured for IPV4 unicast Routes
Neighbor AS4 Capability Negotiation:
Outbound Policy Group:
ID: 4, Use Count: 2
AO Keychain name : 1
TCP Connection state: ESTABLISHED
TCP Keychain name : 1
TCP-AO Enabled : YES
TCP-AO in use : YES
Keychain valid : YES
No of segments dropped : 0
Send-Active-Key
---------------
Key-id : 1
Crypto Algorithm : AES-128-CMAC
Send-id : 100
Recv-id : 100
Include-tcp-options : YES
Accept-ao-mismatch : YES
Recv-Active-Key
---------------
Key-id : 1
Crypto Algorithm : AES-128-CMAC
Send-id : 100
Recv-id : 100
Include-tcp-options : YES
Accept-ao-mismatch : YES
Maximum segment size: 1420
TTL check: value: 0
Byte Sent: 317986, Received: 344092
Local host: 15.1.1.2, Local Port: 179
Remote host: 15.1.1.1, Remote Port: 8220
ISentSeq: 21517275 SendNext: 21835262 TotUnAck: 0
TotSent: 317987 ReTrans: 0 UnAckSeq: 21835262
IRcvSeq: 155554412 RcvNext: 155898505 SendWnd: 16384
TotalRcv: 344093 DupliRcv: 0 RcvWnd: 16384
SendQue: 0 RcvQue: 0 CngstWnd: 1420
History
| Release version | Command history |
|---|---|
| 09.0.10 | This command was modified to add TCP keychain authentication option (AO) information to the output. |