show bfd agent

Displays Bidirectional Forwarding Detection (BFD) agent-related information.
Syntax
show bfd agent info
show bfd agent sessions{ipv4|ipv6|statistics}{session-id|all}[detail][stack-id]
Parameters
info
Specifies all BFD agent-related information.
sessions
Specifies session information for an agent.
ipv4
Specifies IPv4 session information.
ipv6
Specifies IPv6 session information.
statistics
Specifies session statistics.
session-id
Specifies a BFD session.
all
Specifies all BFD sessions.
detail
Specifies detailed information information.
stack-id
Specifies a stack unit.
Modes

User EXEC mode

Usage Guidelines

This command is supported for ICX 7850 devices only.

Examples

The following example shows agent-related information for all IPv4 sessions. 

device> show bfd agent sessions ipv4 all

Flags: H:Hop [S:Single/M:Multi] P:Passive-Mode M:Micro-BFD
MinTx/MinRx/Mult [milliseconds]  HoldTime [seconds]

Id  Neighbor          Local             NHopIntf   Phy-Port Lag-Port MinRx|MinTx|Mult  P/H/M    vrf
--  --------          -----             --------   -------- -------- ----------------- ----- ---------
1   20.20.20.1        10.10.10.1        1/1/13     1/1/13   INVALID  300   300   3     N/M/N default-vrf
2   40.40.40.1        30.30.30.1        1/1/14     1/1/14   INVALID  300   300   3     N/M/N white

The following example shows agent-related information for all sessions. 

device> show bfd agent info

Agent id - 1
  HW Assist      : 1       MicroBFD       : 0           Max Session    : 256
  HA Epoch       : 0
  HA in Prog     : No      HA Start time  : 0:0:0       HA End time    : in future
  UC Session     : 2       AG Session     : 2
  Tx-id          : 6       Rx-Id          : 2
History
Release version Command history
08.0.90 This command was introduced.
Parent topic: Show Commands