show ipv6 tunnel

Displays a summary of IPv6 tunnel information.
Syntax
show ipv6 tunnel [ config ]
Parameters
config
Displays IPv6 tunnel configurations.
Modes

User EXEC mode

Privileged EXEC mode

Global configuration mode

Interface configuration mode

The show ipv6 tunnel command displays the following information.

Output field Description
Tunnel The tunnel interface number.
Mode The tunnel mode:
  • configured: Indicates a manually configured tunnel.
Tunnel Status The status of the tunnel.
  • Active: Indicates that tunnel is in active state.
Packet Received The number of packets received by a tunnel interface. Note that this is the number of packets received by the CPU. It does not include the number of packets processed in hardware.
Packet Sent The number of packets sent by a tunnel interface. Note that this is the number of packets sent by the CPU. It does not include the number of packets processed in hardware.
Examples

The following is sample output from the show ipv6 tunnel command. 

device# show ipv6 tunnel

IP6 Tunnels
Tunnel		Mode        Tunnel Status Packet Received	Packet Sent
1 			   configured 	Active           0 						       0
2 			   configured 	Active           0 						       22419
Parent topic: Show Commands