show interfaces unit
Displays information about all ports in
the stack unit.
Modes
User EXEC mode
Examples
The following example displays information about all ports in the stack unit.
device# show interfaces unit 1
GigabitEthernet1/1/1 is up, line protocol is up
Port up for 7 minute(s) 53 second(s)
Hardware is GigabitEthernet, address is 609c.9f52.9384 (bia 609c.9f52.9384)
Configured speed auto, actual 1Gbit, configured duplex fdx, actual fdx
Configured mdi mode AUTO, actual MDI
EEE Feature Disabled
Untagged member of L2 VLAN 1, port state is FORWARDING
BPDU guard is Disabled, ROOT protect is Disabled, Designated protect is Disabled
Link Error Dampening is Disabled
STP configured to ON, priority is level0, mac-learning is enabled
Openflow is Disabled, Openflow Hybrid mode is Disabled, Flow Control is config enabled, oper enabled, negotiation disabled
Mirror disabled, Monitor disabled
Mac-notification is disabled
VLAN-Mapping is disabled
Not member of any active trunks
Not member of any configured trunks
No port name
IPG MII 96 bits-time, IPG GMII 96 bits-time
MTU 1500 bytes, encapsulation ethernet
MMU Mode is Store-and-forward
300 second input rate: 32 bits/sec, 0 packets/sec, 0.00% utilization
300 second output rate: 280 bits/sec, 0 packets/sec, 0.00% utilization
19 packets input, 2638 bytes, 0 no buffer
Received 0 broadcasts, 19 multicasts, 0 unicasts
0 input errors, 0 CRC, 0 frame, 0 ignored
0 runts, 0 giants
249 packets output, 17437 bytes, 0 underruns
Transmitted 0 broadcasts, 249 multicasts, 0 unicasts
0 output errors, 0 collisions
Relay Agent Information option: Disabled
Protected: No
MAC Port Security: Disabled
UC Egress queues:
Queue counters Queued packets Dropped Packets
0 0 0
1 0 0
2 0 0
3 0 0
4 0 0
5 0 0
6 0 0
7 249 0
8 0 0
9 0 0
MC Egress queues:
Queue counters Queued packets Dropped Packets
0 0 0
1 0 0
2 0 0
3 0 0
4 0 0
5 0 0
6 0 0
7 0 0
8 0 0
9 0 0
Oversubscribed ingress drop counters:
High priority drop 0
Low priority drop 0
Total drop 0
GigabitEthernet1/1/2 is down, line protocol is down
Port down for 8 minute(s) 1 second(s)
Hardware is GigabitEthernet, address is 609c.9f52.9385 (bia 609c.9f52.9385)
Configured speed auto, actual unknown, configured duplex fdx, actual unknown
Configured mdi mode AUTO, actual unknown
EEE Feature Disabled
Untagged member of L2 VLAN 1, port state is BLOCKING
BPDU guard is Disabled, ROOT protect is Disabled, Designated protect is Disabled
Link Error Dampening is Disabled
STP configured to ON, priority is level0, mac-learning is enabled
Openflow is Disabled, Openflow Hybrid mode is Disabled, Flow Control is config enabled, oper enabled, negotiation disabled
Mirror disabled, Monitor disabled
Mac-notification is disabled
VLAN-Mapping is disabled
Not member of any active trunks
Not member of any configured trunks
No port name
IPG MII 96 bits-time, IPG GMII 96 bits-time
MTU 1500 bytes, encapsulation ethernet
MMU Mode is Store-and-forward
300 second input rate: 0 bits/sec, 0 packets/sec, 0.00% utilization
300 second output rate: 0 bits/sec, 0 packets/sec, 0.00% utilization
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 multicasts, 0 unicasts
0 input errors, 0 CRC, 0 frame, 0 ignored
0 runts, 0 giants
0 packets output, 0 bytes, 0 underruns
Transmitted 0 broadcasts, 0 multicasts, 0 unicasts
History
| Release version | Command history |
|---|---|
| 08.0.95 | The command ouptut was modified to display the status of MVRP (enabled or disabled) on an interface. |
| 08.0.95h | The command ouptut was modified to include information for cable signal error scanning status and information. |
| 09.0.10d | The command ouptut was modified to include information for cable signal error scanning status and information. |