show ipv6 pim rp-candidate

Displays candidate rendezvous point (RP) information.
Syntax
show ipv6 pim [ vrf vrf-name ] rp-candidate
Parameters
vrf vrf-name
Displays information for the specified VRF instance.
Modes

User EXEC mode

The show ipv6 pim rp-candidate command displays the following information:

Field

Description

Candidate-RP-advertisement in

Indicates how many seconds will pass before the BSR sends its next RP message.

Note: This field appears only if this device is a candidate RP.

RP

Indicates the IPv6 address of the RP.

Note: This field appears only if this device is a candidate RP.

group prefixes

Indicates the multicast groups for which the RP listed by the previous field is a candidate RP.

Note: This field appears only if this device is a candidate RP.

Candidate-RP-advertisement period

Indicates how frequently the BSR sends candidate RP advertisement messages.

Note: This field appears only if this device is a candidate RP.
Examples

The following example shows information for a candidate RP. 

device> show ipv6 pim rp-candidate
Next Candidate-RP-advertisement in 00:00:10
  RP: 1be::11:21
    group prefixes:
    ff00:: / 8
  Candidate-RP-advertisement period: 60
Parent topic: Show Commands