show ipv6 multicast vlan

Displays multicast listening discovery (MLD) snooping information for all VLANs or for a specific VLAN.
Syntax
show ipv6 multicast vlan vlan-id
Parameters
vlan-id
Specifies the VLAN for which you want information. If you do not specify a vlan-id, information for all VLANs is displayed.
Modes

User EXEC mode

The show ipv6 multicast vlan command displays the following information:

Output Field

Description

version

The MLD version number.

query-t

How often a querier sends a general query on the interface.

group-aging-t

Number of seconds membership groups can be members of this group before aging out.

rtr-port

The router ports which are the ports receiving queries. The display router ports: 1/36(120) 2001:DB8::2e0:52ff:fe00:9900 means port 1/36 has a querier with 2001:DB8::2e0:52ff:fe00:9900 as the link-local address, and the remaining life is 120 seconds.

max-resp-t

The maximum number of seconds a client can wait before it replies to the query.

non-QR

Indicates that the port is a non-querier.

QR

Indicates that the port is a querier.

Unregistered IPv6 Multicast Packets Flooding

Indicates whether flooding is enabled.

Multicast Aging Unit Mask

Stacking unit ID where flow is active (traffic ingression).
Examples

The following example shows MLD snooping information for a VLAN. 

device> show ipv6 multicast vlan
Summary of all vlans. use "sh ipv6 multicast vlan vlan-id" for details
Version=1, Intervals: Query=125, Group Age=260, Max Resp=10, Other Qr=255,
                      Leave Wait=2, Robustness=2

Replication resource sharing: Enabled.
Unregistered IPv6 Multicast Packets Flooding: Disabled
Multicast Aging Unit Mask: 0xa

VL1 no snoop : no local config
VL20: dft V1, glb cfg passive, 0 grp, 0 (*G) cache, no rtr port
VL100 no snoop: PIM on its VE/port
History
Release version Command history
08.0.30 This command was modified to display flooding information.
08.0.50 The output of this command was modified to display the My Query address field.
10.0.00 The output of this command was updated to include information for stacking units where the traffic flow is active.
Parent topic: Show Commands