show ipv6 dhcp-relay
Displays the DHCPv6 relay agent information configured on the device.
Modes
User EXEC configuration mode
The
show ipv6 dhcp-relay command displays the following information:
| Output field | Description |
|---|---|
| Current DHCPv6 relay agent state | Displays whether the current relay agent state is enabled or disabled. |
| DHCPv6 enabled interface(s) | Displays the DHCPv6 enabled interfaces. |
| DHCPv6 Relay Agent Statistics | Displays statistics such as the total number of DHCPv6 packets received and transmitted. |
| Received DHCPv6 Packets | The number of release, relay forward and relay reply packets received. |
Examples
The following example displays the IPv6 DHCP relay statistics.
device(config)> show ipv6 dhcp-relay Current DHCPv6 relay agent state: Enabled DHCPv6 enabled interface(s): e 1/1/3 DHCPv6 Relay Agent Statistics: Total DHCPv6 Packets, Received:0, Transmitted:0 Received DHCPv6 Packets: RELEASE:0,RELAY_FORWARD:0,RELAY_REPLY:0 OtherServertoClient:0,OtherClinettoServer:0
History
| Release version | Command history |
|---|---|
| 08.0.10d | This command was introduced. |
| 08.0.30 | Support for this command was added in FastIron 08.0.30 and later releases. |