show hmon client status

Displays details on the operational status of Health Monitor clients.
Syntax
show hmon client status{ all-clients}
Parameters
all-clients
Specifies that all client status information be displayed.
Modes

Privileged EXEC mode

Usage Guidelines

Diagnostic commands are developed and intended for specialized troubleshooting. Ruckus recommends that you work closely with Ruckus Technical Support in executing diagnostic commands and interpreting their results.

The show hmon client status command displays the following information:

Output field Description
Process Name Name of application process for the specified Health Monitor client ID
Valid "Yes" if this is a valid Health Monitor client
Admin. State Administrative State is one of the following:
  • Enabled, Not Started, HA Disabled - Application is enabled; however, it is not started, as it is not qualified to run given the current stack role of the device. Not monitored for HA because it is not running.
  • Enabled, Started, HA Enabled - Application is enabled, started or running, and monitored for HA.
  • Disabled, HA Disabled - Application is not enabled, started, running, or monitored for HA.
Oper. State Operational State is one of the following:
  • Up - Application is up and running.
  • Down - Application is not running.
  • Recovering - Application has crashed or failed, Hmon has initiated a recovery, and the application is recovering (transient state).
  • Recovery Failed - The application recovery has failed.
  • Faulty - The application has exhausted allowable recovery attempts due to repeated failures and has been marked as faulty.
Examples

The following example displays information for four processes. Client 3 (dhcpd) is Down. 

device# show hmon client status all-clients 
-----------------------------
Health Monitor Client Status: 
-----------------------------

Status for client ID 4:
Process Name              : nginx
Valid                     : Yes
Admin. State              : Enabled, Started, HA Enabled
Oper. State               : Up

Status for client ID 5:
Process Name              : uwsgi-2.7
Valid                     : Yes
Admin. State              : Enabled, Started, HA Enabled
Oper. State               : Up

Status for client ID 6:
Process Name              : PySzAgtSrv.py
Valid                     : Yes
Admin. State              : Enabled, Started, HA Enabled
Oper. State               : Up

Status for client ID 3:
Process Name              : dhcpd
Valid                     : Yes
Admin. State              : Disabled, HA Disabled
Oper. State               : Down
History
Release version Command history
08.0.90 This command was introduced.
09.0.00 This command was modified.
Parent topic: Show Commands