`show acl-on-arp`

Displays the list of ACLs that are configured to filter ARP requests.

Syntax

show acl-on-arp[ethernetunit/slot/port[tounit/slot/port]... ]|loopbacknum|tunnelnum|venum]

Parameters

ethernetunit/slot/port: Displays the list of ACLs that are configured to filter ARP requests on a specific Ethernet interface.
tounit/slot/port: Displays the list of ACLs that are configured to filter ARP requests on a range of Ethernet interfaces.
loopbacknum: Displays the list of ACLs that are configured to filter ARP requests on a specific loopback interface.
tunnelnum: Displays the list of ACLs that are configured to filter ARP requests on a specific tunnel interface.
venum: Displays the list of ACLs that are configured to filter ARP requests on a specific VE interface.

Modes

User EXEC mode

Privileged EXEC mode

Global configuration mode

Interface configuration mode

Access list configuration mode

Usage Guidelines

The Filter Count column shows how many ARP packets have been dropped on the interface since the last time the count was cleared.

Examples

The following example displays a sample output of the show acl-on-arp command.

device(config)# show acl-on-arp
Port	ACL ID		Filter Count
2		103  		10
3		102		  23
4		101		  12

History

Release version	Command history
08.0.61	This command was modified to add laglag-id options.
09.0.00	This command was modified to remove laglag-id options.

show acl-on-arp