show pvstplus-protect-ports

Displays the status of the PVST+ Protect feature, configured by means of the pvstplus-protect command.
Syntax
show pvstplus-protect-ports [ ethernet unit/slot/port [ to unit/slot/port ] ]
Parameters
ethernet
Specifies an Ethernet port.
unit/slot/port
Number of an Ethernet port. Ranging is allowed by means of the to keyword.
to
Enables optional ranging.
Modes

Privileged EXEC mode

Examples

The following example displays the status of PVST+ Protect on all Ethernet interfaces, including the number of dropped PVST+ BPDUs. 

device# show pvstplus-protect-ports
        Port    PVST Drop Count
        1/1/1   11
        1/1/2   0
        1/1/3   0
        1/1/4   0

The following example displays the status of PVST+ Protect on a single Ethernet interface. 

device# show pvstplus-protect-ports ethernet 1/1/1
PVST-protect is enabled on port 1/1/1.  PVST drop count is 11

The following example displays the status of PVST+ Protect on a range of Ethernet interfaces. 

device# show pvstplus-protect-ports ethernet 1/1/1 to 1/1/4
History
Release version Command history
08.0.30mb This command was introduced.
Parent topic: Show Commands