show openflow flows
Displays the flows information on the OpenFlow ports.
Modes
User EXEC mode
The
show openflow flows command displays the following information:
| Output field | Description |
|---|---|
| Flow | Number of flows |
| Packet | Total Number of data packets trapped to be sent to controller |
| Byte | Total Number of data bytes trapped to be sent to controller |
Examples
The following example displays the output for flows.
device# show openflow flows
Total Number of data packets sent to controller: 0
Total Number of data bytes sent to controller : 0
Total Number of data packets from controller : 0
Total Number of data bytes from controller : 0
Total Number of Flows: 1
Total Number of Port based Flows: 1
Total Number of L2 Generic Flows: 0
Total Number of L3 Generic Flows: 0
Total Number of L2+L3 Generic Flows: 0
Total Number of L23 Generic Flows: 0
Total Number of Hardware entries for flows: 1
Total Number of Hardware entries for Port flow: 1
Total Number of Hardware entries for Generic flow: 0
Total Number of Openflow interfaces: 6
Total Number of L2 interfaces: 2
Total Number of L3 interfaces: 4
Total Number of L23 interfaces: 0
Flow ID: 2 Priority: 32768 Status: Active
Rule:
In Port: e1/1/1
Ether type: 0x800
Destination IP: 19.0.0.19 Subnet IP: 255.255.255.255
Instructions: Apply-Actions
Action: FORWARD
Out Group: 11
Statistics:
Total Pkts: 0
Total Bytes: 0
Idle and Hard timeouts:
Received Flow idle timeout = 0
Received Flow hard timeout = 0
History
| Release version | Command history |
|---|---|
| 08.0.20 | This command was introduced. |
| 08.0.50 | This command was modified for out group and timeouts. |