show transmit-counter

Displays traffic counter (also called transmit counters) profiles and traffic counter statistics.
Syntax
show transmit-counter { profiles | values number }
Parameters
profiles
Displays details of the traffic traffic counter profiles.
values number
Displays details of traffic queue counters. The number specifies a valid enhanced traffic counter in the range from 1 through 48.
Modes

User EXEC mode

Privileged EXEC mode

Global configuration mode

Interface configuration mode

Usage Guidelines
Note: Once the enhanced traffic counters are displayed, the counters are cleared (reset to zero).

The show transmit-counter values command displays the following information:

Output field Description
Transmitted Frames The number of frames transmitted.
Known Unicast The number of known unicast packets transmitted.
Multicast & Unknown Unicast The number of multicast and unknown unicast packets transmitted.
Broadcast The number of broadcast packets transmitted.
Dropped Frames The number of dropped frames.
Bridge Egress Filtered The number of bridged outbound packets that were filtered and dropped. This number includes the number of packets that were dropped because of any of the following conditions:
  • The port was disabled or the link was down.
  • The port or port region does not belong to the VLAN specified in the transmit counter configuration.
  • A Layer 2 protocol (for example, spanning tree) had the port in a blocked state.
  • The source port was suppressed for multi-target packets.
  • The priority queue specified in the traffic counter was not allowed for some other reason.
  • Unknown unicast and unregistered multicast packets were filtered.
Congestion Drops The number of outbound packets that were dropped because of traffic congestion.
Examples

The following is a sample output of the show transmit-counter profiles command. 

device# show transmit-counter profiles

Tx Counter 	Port(s)		       Vlan Id	 Priority	  Device		Set
1 		        1/1/1-1/1/12 	  All 	    All 		     Dev 0 		Set0
4 			       1/ 1/18 		 1 		 7 		                Dev 1 		Set0
10 		       1/1/13-1/1/24   100 	    All 	   	  Dev 1 		Set10

The following is sample output from the show transmit-counter values command. 

device# show transmit-counter values 1

Transmit Queue Counter Values for Counter 1:
Transmitted Frames:
 Known Unicast               : 17204
 Multicast & Unknown Unicast : 2797
 Broadcast                   : 5
Dropped Frames:
 Bridge Egress Filtered      : 100
 Congestion Drops            : 0
Parent topic: Show Commands