show sz sessions
Displays the Telnet and SSH sessions used by SmartZone.
Modes
User EXEC mode
Privileged EXEC mode
Global configuration mode
Usage Guidelines
If the ICX device is managed by SmartZone, the 'show who' and 'show telnet' commands does not display the SSH and Telnet sessions used by SmartZone.
The
show sz sessions command displays the following information:
| Output field | Description |
|---|---|
| Inbound | Connections listed under this heading are inbound. |
| Outbound | Connections listed under this heading are outbound. |
| Connection | The SSH and Telnet connection ID. |
| Server Hostkey | The type of server host key. This can be DSA or RSA. |
| Client IP Address | The IP address of the SSH client. |
| Server IP Address | The IP address of the SSH server. |
| Idle timeout (minutes) | SSH idle timeout value in minutes. |
Examples
The following example displays sample output of the
show sz sessions command showing the Telnet connections, SSH connections and their status.
device# show sz sessions
Telnet server status: Enabled
Telnet connections (inbound):
2 closed
3 closed
4 closed
5 closed
6 closed
7 closed
8 closed
9 closed
10 closed
Telnet connections (outbound):
11 closed
12 closed
13 closed
14 closed
15 closed
SSH server status: Enabled
SSH copy-received-cos status: Disabled
SSH connections:
SSH connections (inbound):
1 pending, client ip address 172.26.67.239, server hostkey DSA, privilege super-user
using vrf default-vrf.
you are connecting to this session
2 minute(s) 15 second(s) in idle
2 closed
3 closed
4 closed
5 closed
6 closed
7 closed
SSH connection (outbound):
9 established, server ip address 127.0.0.1, from Console session, , server hostkey DSA, privilege super-user
using vrf default-vrf.
40 second(s) in idle
10 closed
11 closed
12 closed
13 closed
14 closed
15 closed
16 closed
17 closed
18 closed
19 closed
20 closed
History
| Release version | Command history |
|---|---|
| 08.0.90 | This command was introduced. |