show spx pe-id

For the designated port extender (PE) in a Switch Port Extender (SPX) system, displays status information or information on the PE chain.
Syntax
show spx pe-id { identifier } [ status ]
Parameters
identifier
Specifies the PE chain containing this PE.
status
Displays status information for the specified PE unit.
Modes

All modes

The show spx pe-id command displays the following information:

Output field Description
ID The SPX unit ID number (CB or PE; PE units are numbered from 17 through 56).
"S" or "D" Static or Dynamic. Indicates whether the configuration has been saved to memory. Dynamic configurations are lost when the unit is removed.
Type The FastIron device model (SKU).
Role The role of the unit in the SPX system: active (active controller in the CB stack), member (CB stack member), standby (standby controller for the CB stack), or spx-pe (PE unit).
Mac Address The MAC address of the unit.
Pri The priority of the unit.
State Displays state of unit, from among these possibilities: Local (unit from which the command was entered), remote (unit is not local), or reserve (indicates a reserved rather than an active unit).
Comment

Ready (unit is operational).

Synchronizing (output example: 21 S ICX7450-24G spx-pe cc4e.248b.a448 N/A remote Synchronizing (st=13)).

Examples

The following example provides information on PE unit 17, its PE chain, its SPX connection to the Control Bridge stack, and the CB stack members. 

ICX7750-48F Router(config)# show spx pe-id 17
Show the sub-stack containing spx unit 17
T=13m8.1: alone: standalone, D: dynamic cfg, S: static
ID   Type          Role    Mac Address    Pri State   Comment                   
1  S ICX7750-48XGF member  0000.0000.0000 100 reserve 
2  S ICX7750-48XGF active  cc4e.246d.d080 200 local   Ready
3  S ICX7750-48XGF standby cc4e.24d2.2680 200 remote  Ready
17 S ICX7250-24    spx-pe  cc4e.24dc.b60e N/A remote  Ready
18 S ICX7250-48    spx-pe  cc4e.24e4.5426 N/A remote  Ready
23 S ICX7250-48    spx-pe  cc4e.24e1.e38a N/A remote  Ready
56 S ICX7250-24    spx-pe  cc4e.24dc.c2b6 N/A remote  Ready

    active       standby                                                       
     +---+        +---+                                                        
 -2/4| 2 |2/1--2/4| 3 |2/1-                                                    
 |   +---+        +---+   |                                                    
 |                        |                                                    
 |------------------------|                                                    
            +----+        +----+        +----+        +----+                   
  2/1/3==2/1| 56 |1/1==1/3| 17 |1/1==1/3| 18 |1/1==1/3| 23 |2/1==3/1/3         
            +----+        +----+        +----+        +----+

The following example displays status information indicating that PE unit 17 is operational and provides the last time the PE unit detached from the SPX network. 

ICX7750-48F Router# show spx pe-id 17 status 

PE-ID    operational-status    Detach-count    Last-detached-time
   17                    UP               1    00:00:25.282 GMT+00 Wed Jul 31 2019
History
Required for all new and updated commands going forward.
Release version Command history
08.0.40 This command was introduced.
08.0.92 The status option was introduced.
Parent topic: Show Commands