show spx lag
Displays SPX LAG information about a Switch Port Extender (SPX) Link Aggregation
Group (LAG).
Parameters
Modes
All modes
Examples
The following example displays SPX LAG information for PE 17.
device(config)# show spx lag pe 17
PE-ID Direction Status LAG-Capacity LAG-Ports
17 TO PE 56 UP 2 X 1G 17/1/3 to 17/1/4
TO PE 18 UP 2 X 1G 17/1/1 to 17/1/2
The following example displays SPX LAG information for all PE units.
device(config)# show spx lag pe all
PE-ID Direction Status LAG-Capacity LAG-Ports
17 TO PE 56 UP 2 X 1G 17/1/3 to 17/1/4
TO PE 18 UP 2 X 1G 17/1/1 to 17/1/2
18 TO PE 17 UP 2 X 1G 18/1/3 to 18/1/4
TO PE 23 UP 2 X 1G 18/1/1 to 18/1/2
23 TO PE 18 UP 2 X 1G 23/1/3 to 23/1/4
To CB UP 2 X 10G 23/2/1 23/2/3
56 To CB UP 2 X 10G 56/2/1 56/2/3
TO PE 17 UP 2 X 1G 56/1/1 to 56/1/2
History
| Release version | Command history |
|---|---|
| 08.0.40 | This command was introduced. |
| 08.0.92 | This command was modified to add SPX LAG PE options. |