show ipsec profile
Displays configuration information about IP security (IPsec) profiles.
Parameters
Modes
User EXEC mode
Usage Guidelines
This command may be entered in all configuration modes.
When an IPsec profile is not specified, this command displays configuration information for all IPsec profiles.
The
show ipsec profile command displays the following information:
| Output field | Description | |
|---|---|---|
| Name | The name of an IPsec profile. | |
| Description | A description of the IPsec profile. | |
| Ike Profile | The name of the IKEv2 profile that is attached to this IPsec profile. | |
| Lifetime | The lifetime period (in minutes) for an IPsec SA. The range is from 10 through 1440. The default value is 480 minutes (8 hours). A value of 0 indicates that the IPsec SA remains up indefinitely. | |
| Anti-replay service |
Please provide a description of this field
|
|
| DH group | The Diffie-Hellman group that is used for IKEv2 negotiations. | |
| Proposal | The name of any IPsec proposals that are attached to this IPsec profile. | |
Examples
The following example shows how to display IPsec profile configuration information.
device# show ipsec profile ================================================================================== Name : 17 Description : 17 Ike Profile : 17 Lifetime : 28800 sec Anti-Replay Service : Disabled DH Group : None Proposal : 17
History
| Release version | Command history |
|---|---|
| 8.0.50 | This command was introduced. |