show ipsec card-utilization

Displays information about the utilization of the IPsec interface module that includes the administration status of the module and traffic statistics.
Syntax
show ipsec card-utilization
Modes

Privileged EXEC mode

Usage Guidelines

Traffic utilization percentages have a variance of plus or minus percent.

The show ipsec card-utilization command displays the following information:

Output field Description
IPSEC Module The module ID of the system where the ICX7400-SERVICE-MOD module is installed.
admin The administration status of the ICX7400-SERVICE-MOD module. Possible values are UP or DOWN.
Tx pkt count The total number of packets transmitted over the ICX7400-SERVICE-MOD module.
Rx pkt count The total number of packets received from the ICX7400-SERVICE-MOD module.
Tx pkt/sec The packet transmission rate over the ICX7400-SERVICE-MOD module.
Rx pkt/sec The transmission rate of packets received from the ICX7400-SERVICE-MOD module.
Tx byte count The total number of bytes transmitted over the ICX7400-SERVICE-MOD module.
Rx byte count The total number of bytes received from the ICX7400-SERVICE-MOD module.
Tx bytes/sec The packet transmission rate (in bytes) over the ICX7400-SERVICE-MOD module.
Rx bytes/sec The transmission rate (in bytes) of packets received from the ICX7400-SERVICE-MOD module.
Encrypt In Utilization Plain text packet received by the router for encryption.
Decrypt In Utilization Encrypted packet received by the router for decryption.
Encrypt Out Utilization Encrypted packet going out of the router.
Decrypt Out Utilization Plain text packet going out of the router after decryption.
Examples

The following example shows how to display information about utilization of the ICX7400-SERVICE-MOD interface module when the maximum amount of traffic is ingressing on the device. 

device# show ipsec card-utilization

IPSEC Module     : 1/4, admin: UP

card-utilization :
 Tx pkt count           : 2181783416   Rx pkt Count            : 2181782549
 Tx pkt/sec             : 30104535     Rx pkt/sec              : 30104483
 Tx byte count          : 208735473958 Rx byte Count           : 306526015230
 Tx bytes/sec           : 4166829344   Rx bytes/sec            : 4890915108
 Encrypt In Utilization : 53.75%       Encrypt Out Utilization : 100.00%
 Decrypt In Utilization : 100.00%      Decrypt Out Utilization : 93.24%
History
Release version Command history
08.0.50 This command was introduced.
Parent topic: Show Commands