show dot1x ip-acl

Displays the Layer 3 ACLs for 802.1X authentication.
Syntax
show dot1x ip-acl { all | stack-unit id | ethernet unit/slot/port }
Parameters
all
Specifies the ACLs at the global level.
ethernet unit/slot/port
Specifies the ACLs at the interface level.
stack-unit id
Displays 802.1X authentication ACLs for the specified stack unit.
Modes

Privileged EXEC mode

Global configuration mode

Interface configuration mode

The show dot1x ip-acl command displays the following information.

Output field Description
Port The port number.
MAC Addr The MAC address of the client.
Inbound IPv4 ACL The IPv4 ACL applied to the authenticated port in the inbound direction.
Outbound IPv4 ACL The IPv4 ACL applied to the authenticated port in the outbound direction.
Inbound IPv6 ACL The IPv6 ACL applied to the authenticated port in the inbound direction.
Outbound IPv6 ACL The IPv6 ACL applied to the authenticated port in the inbound direction.
Examples

The following example displays 802.1X IP ACL authentication information for Ethernet interface 1/1/15. 

device# show dot1x ip-acl ethernet 1/1/15
-------------------------------------------------------------------
Port      MAC              Inbound     Outbound   Inbound   Outbound
          Addr             IPv4 ACL    IPv4 ACL   IPv6 ACL  IPv6 ACL	
-------------------------------------------------------------------
1/1/15	 0180.c200.0003   10           11          20        21
1/1/15	 0180.c300.0005   100          101         120       121
History
Release version Command history
08.0.20 This command was introduced.
08.0.50 The command output was updated.
08.0.70 The command was modified to include the stack-unit id option.
Parent topic: Show Commands