show dot1x

Displays information about the 802.1X configuration.
Syntax
show dot1x
Modes

User EXEC mode

Privileged EXEC mode

Global configuration mode

Interface configuration mode

dot1x configuration mode

The show dot1x command displays the following information:

Output field Description
PAE Capability The Port Access Entity (PAE) role for the device. This is always "Authenticator Only".
system-auth-control Whether system authentication control is enabled on the device. The dot1x-enable command enables system authentication control on the device.
re-authentication Whether periodic re-authentication is enabled on the device. When periodic re-authentication is enabled, the device automatically re-authenticates clients every 3,600 seconds by default.
global-filter-strict-security Whether strict security mode is enabled or disabled globally.
quiet-period When the device is unable to authenticate a client, the amount of time the device waits before trying again (default 60 seconds).
tx-period When a client does not send back an EAP-response/identity frame, the amount of time the device waits before retransmitting the EAP-request/identity frame to a client (default 30 seconds).
supptimeout When a client does not respond to an EAP-request frame, the amount of time before the device retransmits the frame.
servertimeout When the Authentication Server does not respond to a message sent from the client, the amount of time before the device retransmits the message.
maxreq The number of times the device retransmits an EAP-request/identity frame if it does not receive an EAP-response/identity frame from a client (default 2 times).
reAuthMax The maximum number of re-authentication attempts.
re-authperiod How often the device automatically re-authenticates clients when periodic re-authentication is enabled (default 3,600 seconds).
Protocol Version The version of the 802.1X protocol in use on the device.
Examples

The following example displays information about the 802.1X configuration. 

device# show dot1x

PAE Capability                    : Authenticator Only
system-auth-control               : Enable
re-authentication                 : Disable
global-filter-strict-security     : Enable
quiet-period                      : 60 Seconds
tx-period                         : 30 Seconds
supptimeout                       : 30 Seconds
servertimeout                     : 30 Seconds
maxreq                            : 2
reAuthMax                         : 2
re-authperiod                     : 3600 Seconds
Protocol Version                  : 1
Parent topic: Show Commands