ip dhcp-server pool

Creates a DHCP server address pool.
Syntax
ip dhcp-server pool name
no ip dhcp-server pool name
Parameters
name
The name of the address pool. The name of the address pool must not contain the following characters: (#), ({), (}) or (;).
Modes

Global configuration mode

Usage Guidelines

Use this command to switch to pool configuration mode (config-dhcp-name# prompt) and create an address pool.

Before using this command, you must configure the subnet network and mask of the DHCP address pool. Refer to the network (DHCP) command for more information.

The no form of this command disables the address pool.

Examples

The following example creates a DHCP address pool named "cabo". 

device# configure terminal
device(config)# ip dhcp-server pool cabo
History
Release version Command history
10.0.10f This command was modified to remove the following characters from the name of the address pool: (#), ({), (}) or (;).
Parent topic: Commands I