ipx-proto

Configures the IPX protocol-based VLANs.
Syntax
ipx-proto [ name string ]
no ipx-proto [ name string ]
Command Default

An IPX protocol-based VLAN is not configured.

Parameters
name string
The IPX protocol-based VLAN name. The name can be up to 32 characters in length.
Modes

VLAN configuration mode

Usage Guidelines

The no form of the command removes the IPX protocol-based VLAN.

Examples

The following example shows the how to configure an IPX protocol-based VLAN. 

device(config)# vlan 10 by port
device(config-vlan-10)# untagged ethernet 1/1/1 to 1/1/6 
added untagged port ethe 1/1/1 to 1/1/6 to port-vlan 30.
device(config-vlan-10)# ip-proto name IP_Prot_VLAN
Parent topic: Commands I