ipv6 mld group-membership-time

Specifies the multicast listener discovery (MLD) group membership time for the default VRF or for a specified VRF.
Syntax
ipv6 mld group-membership-time num
no ipv6 mld group-membership-time num
Command Default

An MLD group will remain active on an interface in the absence of a group report for 260 seconds, by default.

Parameters
num
Number in seconds, from 5 through 26000.
Modes

Global configuration mode

VRF configuration mode

Usage Guidelines

The no form of this command resets the group membership time interval to the default of 260 seconds.

Group membership time defines how long a group will remain active on an interface in the absence of a group report.

Examples

This example specifies an MLD group membership time of 2000 seconds for the default VRF. 

device# configure terminal
device(config)# ipv6 mld group-membership-time 2000

This example specifies an MLD group membership time of 2000 seconds for a specified VRF. 

device# configure terminal
device(config)# ipv6 router pim vrf blue
device(config-ipv6-pim-router-vrf-blue)# ipv6 mld group-membership-time 2000
Parent topic: Commands I