ipx-network

Configures the IPX network protocol-based VLANs.
Syntax
ipx-network network-number ipx-frame-type [ name string ]
no ipx-network network-number ipx-frame-type [ name string ]
Command Default

An IPX network protocol-based VLAN is not configured.

Parameters
network-number
Specifies the network number in hexadecimal format.
ipx-frame-type
Defines the IPX frame encapsulation standard types. The following are the supported encapsulation standard types:
ethernet_802.2
Specifies the Ethernet 802.2 standard that can be configured for the protocol.
ethernet_802.3
Specifies the Ethernet 803.3 standard that can be configured for the protocol.
ethernet_ii
Specifies the Ethernet II standard that can be configured for the protocol.
ethernet_snap
Specifies the Ethernet subnetwork access protocol standard that can be configured for the protocol.
name string
Specifies the Ethernet standard name. The string can be up to 32 characters in length.
Modes

VLAN configuration mode

Usage Guidelines

The no form of the command disables the IPX network protocol-based VLAN.

Examples

The following example shows how to configure the IPX network protocol-based VLAN. 

device(config)# vlan 20 name IPX_VLAN by port
device(config-vlan-10)# untagged ethernet 1/2/1 to 1/2/6 
added untagged port ethe 1/2/1 to 1/2/6 to port-vlan 20.
device(config-vlan-10)# ipx-network abcd ethernet_ii name Eng-LAN
Parent topic: Commands I