`ip multicast-boundary`

Defines boundaries for PIM enabled interfaces.

Syntax

ip multicast-boundary acl-spec

no ip multicast-boundary acl-spec

Command Default

Boundaries are not defined.

Parameters

acl-spec: Specifies the number or name identifying an access list that controls the range of group addresses affected by the boundary.

Modes

VE interface configuration mode

Usage Guidelines

The no form of this command removes the boundary on a PIM enabled interface.

You can use standard ACL syntax to configure an access list.

Examples

The following example defines a boundary named MyAccessList for a PIM enabled interface.

device(config)# ip multicast-boundary MyAccessList

ip multicast-boundary