ipv6 ospf transmit-delay

Configures transmit delay for link-update packets. The transmit delay is the estimated time required for OSPFv3 to send link-state update packets on the interface to which you are connected.
Syntax
ipv6 ospf transmit-delay value
no ipv6 ospf transmit-delay
Command Default

The transmit delay is set to 1 second.

Parameters
value
Transmit delay in seconds. Valid values range from 0 through 3600 seconds.
Modes

Interface subtype configuration mode

Usage Guidelines

The no form of the command restores the default value.

Examples

The following example sets a transmit delay of 25 seconds for devices on a specific OSPFv3 Virtual Ethernet (VE) interface. 

device# configure terminal
device(config)# interface interface ve 1
device(config-vif-1)# ipv6 ospf transmit-delay 25
History
Parent topic: Commands I