ipv6 ospf network

Configures network type.
Syntax
ipv6 ospf network { broadcast | point-to-point }
no ipv6 ospf network
Command Default

Network type is broadcast for Ethernet and VE interfaces. Network type is point-to-point for tunnel and GRE interfaces.

Parameters
broadcast
Network type is broadcast, such as Ethernet.
point-to-point
Network type is point-to-point.
Modes

Interface subtype configuration mode

Usage Guidelines

Point-to-point can support unnumbered links, which requires less processing by OSPFv3.

The no form of the command removes the network-type configuration.

Note: The network type non-broadcast is not supported at this time.
Examples

The following example configures an OSPFv3 point-to-point link on a specific OSPFv3 Virtual Ethernet (VE) interface. 

device# configure terminal
device(config)# interface interface ve 1
device(config-vif-1)# ipv6 ospf network point-to-point

The following example configures an OSPFv3 broadcast link on a specific OSPFv3 Virtual Ethernet (VE) interface. 

device# configure terminal
device(config)# interface interface ve 1
device(config-vif-1)# ipv6 ospf network broadcast
History
Parent topic: Commands I