ipv6 rip summary-address
Advertises a summary of IPv6 addresses from an interface and specifies an IPv6 prefix
that summarizes the routes.
Syntax
ipv6 rip summary-address
{ipv6-prefix/prefix-length
}
no ipv6 rip summary-address{ipv6-prefix/prefix-length
}
Command Default
By default, original full-length routes rather than summary routes are advertised.
Parameters
Modes
Interface configuration mode
Usage Guidelines
Use the
no form of the command to stop advertising the summarized IPv6 prefix.
The IPv6 prefix value must be separated from the prefix length by a forward slash ( / ).
Examples
The following example advertises the summarized prefix 2001:db8::/36 instead of the IPv6 address 2001:db8:0:adff:8935:e838:78:e0ff/64 from Ethernet interface 3/1/1.
device# configure terminal device(config)# interface ethernet 3/1/1 device(config-if-e40000-3/1/1)# ipv6 address 2001:db8:0:adff:8935:e838:78: e0ff /64 device(config-if-e40000-3/1/1)# ipv6 rip summary-address 2001:db8::/36